Abstract:Low-emittance photoinjector-enabled cutting-edge scientific instruments, such as free-electron lasers, inverse Compton scattering light sources, and ultrafast electron diffraction, will greatly benefit from the improved repetition rate. In this paper, we proposed a specifically designed S-band radio frequency (RF) photoinjector to obtain low emittance and kilohertz (kHz) high-repetition rates simultaneously. By lowering the gradient, much lower RF power is needed to feed the electron gun, and then the heat problem is much easier to handle. Meanwhile, by optimizing the length of the gun's first cell from the normal case of 0.6-cell to 0.4-cell, the launch phase and the extraction field are significantly improved, thus ensuring the generation of low-emittance electron beams. In our design, the proposed 1.4-cell RF gun can work effectively under different field gradients ranging from 30 MV/m to 100 MV/m. For a standard case of 60 MV/m, 2.5 MW peak RF power with μs level pulse width is sufficient, thus offering the feasibility of improving the repetition rate to kHz level with a standard 5 MW irradiation klystron. In addition, simulated electron beams with a low emittance of 0.29 mm.mrad@200 pC can be generated by this proposed photoinjector, showing that this high-repetition rate injector holds the potential to deliver high-quality beams comparable to those of state-of-the-art S-band photoinjectors. Combining the merits of low emittance and high-repetition rate, this proposed photoinjector will provide a new possibility for future free-electron laser facilities operating at repetition rates ranging from kHz to tens of kHz.

DESIGN OF AN L-BAND RF PHOTOINJECTOR FOR THE IDAHO ACCELERATOR CENTER 44 MeV LINAC

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

Design and simulation of an S-band RF photogun for a linac-injector for the SYLA FEL

Beam dynamic design of a high intensity injector for proton linac

Development of the Lanzhou Heavy Ion Linac

Design of a CW high charge state heavy ion RFQ for SSC-LINAC

Conceptual design of linear injector for SSC of HIRFL

Design, Fabrication, and Beam Commissioning of A Continuous-Wave Four-Rod Rf Quadrupole

Design of a Compact C-band High Brightness Photoinjector for an Ultra-Fast Electron Diffraction

High-brightness Photo-Injector with Standing-Wave Buncher-Based Ballistic Bunching Scheme for Inverse Compton Scattering Light Source

A Simulation of the Photoionization of H- Together with the Subsequent Tracking of the Liberated Electrons

Beam Dynamics simulations for ERDC project -- SRF linac for industrial use

Design of a kilohertz repetition rate, low-emittance S-band photoinjector

Beam Optimization of Helium Injector for Coupled RFQ–SFRFQ Linac

THE RESEARCH OF ELECTRON RF GUN BASED ON X-BAND DAW (DISK-AND-WASHER) ACCELERATING STRUCTURE

Successful High Power Acceleration of the HSC Type Injector for Cancer Therapy in IMP

RF design and study of a 325 MHz 7 MeV APF IH-DTL for an injector of a proton medical accelerator

Design and Low-Power RF Test of a C-band Cryogenic RF Gun

Design of a 4 MeV/u IH-DTL Injector for Cancer Therapy

THE R&D STATUS OF SSC-LINAC

Physics Design of a 200-MeV Electron Injector Linac With a Thermionic Electron Gun for the Korean Fourth-Generation Storage Ring Light Source