Abstract:Low-emittance photoinjector-enabled cutting-edge scientific instruments, such as free-electron lasers, inverse Compton scattering light sources, and ultrafast electron diffraction, will greatly benefit from the improved repetition rate. In this paper, we proposed a specifically designed S-band radio frequency (RF) photoinjector to obtain low emittance and kilohertz (kHz) high-repetition rates simultaneously. By lowering the gradient, much lower RF power is needed to feed the electron gun, and then the heat problem is much easier to handle. Meanwhile, by optimizing the length of the gun's first cell from the normal case of 0.6-cell to 0.4-cell, the launch phase and the extraction field are significantly improved, thus ensuring the generation of low-emittance electron beams. In our design, the proposed 1.4-cell RF gun can work effectively under different field gradients ranging from 30 MV/m to 100 MV/m. For a standard case of 60 MV/m, 2.5 MW peak RF power with μs level pulse width is sufficient, thus offering the feasibility of improving the repetition rate to kHz level with a standard 5 MW irradiation klystron. In addition, simulated electron beams with a low emittance of 0.29 mm.mrad@200 pC can be generated by this proposed photoinjector, showing that this high-repetition rate injector holds the potential to deliver high-quality beams comparable to those of state-of-the-art S-band photoinjectors. Combining the merits of low emittance and high-repetition rate, this proposed photoinjector will provide a new possibility for future free-electron laser facilities operating at repetition rates ranging from kHz to tens of kHz.

Design and Low-Power RF Test of a C-band Cryogenic RF Gun

An Ultrahigh-Vacuum S-band Photocathode Radio-Frequency Electron Gun

Structure design and optimization of a compact C-band photocathode RF GUN

Design of a Compact C-band High Brightness Photoinjector for an Ultra-Fast Electron Diffraction

Development of an L-band Photocathode RF Gun at Tsinghua University

RF design and high power tests of a new tsinghua photocathode RF GUN

Design, Fabrication, and Beam Commissioning of a 216.667 MHz Continuous-Wave Photocathode Very-High-frequency Electron Gun

Development of a High-Gradient X-band RF Gun with Replaceable Field Emission Cathodes for RF Breakdown Studies

Consideration of Optimized Design for Photocathode RF Gun

High Performance Operation of a Direct-Current and Superconducting Radio-Frequency Combined Photocathode Gun

Ultra-High Brightness Electron Beams from Very-High Field Cryogenic Radio-frequency Photocathode Sources

Design of a kilohertz repetition rate, low-emittance S-band photoinjector

R&D of a multi cavity RF gun with thermionic cathode for BFEL

Ultra-low Emittance X -Band Photocathode RF Gun

Development of 1.3 GHz Medium-β (β = 0.634) Disk-Loaded Deflecting Cavity for 150 Kev Electron Beam

Stable Operation of the Dc-Srf Photoinjector

Optimized Design for High-Current, Low-Emmittance Photocathode RF Gun

A Double-Frequency Rf Gun for Field Emission

Performance of Bialkali Photocathode in DC-SRF Photoinjector

Research and Fabrication of the Photocathode Used in DC-SC Photocathode RF Electron Gun

High brightness CW electron beams from Superconducting RF photoemission gun