Abstract:Plasma-based accelerators driven by either intense lasers<a href="/articles/s41567-021-01202-6#ref-CR1">1</a> or charged particle beams<a href="/articles/s41567-021-01202-6#ref-CR2">2</a> can accelerate electrons or positrons with extremely high gradients compared with conventional radio-frequency accelerators. For their use as next-generation light sources and in energy frontier colliders<a href="/articles/s41567-021-01202-6#ref-CR3">3</a>, beams with good stability, high quality, controllable polarization and excellent reproducibility<a href="/articles/s41567-021-01202-6#ref-CR4">4</a>,<a href="/articles/s41567-021-01202-6#ref-CR5">5</a> are required. The accelerated electrons can be either internally injected directly from the background plasma or externally injected from conventional accelerators. Despite significant progress<a href="#ref-CR6">6</a>,<a href="#ref-CR7">7</a>,<a href="#ref-CR8">8</a>,<a href="#ref-CR9">9</a>,<a href="#ref-CR10">10</a>,<a href="#ref-CR11">11</a>,<a href="#ref-CR12">12</a>,<a href="#ref-CR13">13</a>,<a href="/articles/s41567-021-01202-6#ref-CR14">14</a>, the beam properties obtained with the internal injection scheme fall short of simultaneously reaching these requirements. In contrast, such high-property beams are routinely generated from conventional accelerators. Therefore, it is important to demonstrate the injection from a conventional accelerator into a plasma-based machine followed by further acceleration of the beam. Here we report the demonstration of external injection from a conventional linear accelerator into a laser wakefield accelerator and subsequent acceleration without any significant loss of charge, which is achieved by properly shaping and matching the beam into the plasma structure. The experimental results, combined with three-dimensional particle-in-cell simulations, indicate that this is possible with modest degradation in the beam quality. This work is an important step towards realizing a high-throughput, multistage, high-energy, hybrid conventional-plasma-based accelerator.

Proton Injector Acceptance Tests for a Dielectric Wall Accelerator (dwa):Characterisation of Advanced Injection System of Light Ions (AISLI)

Beam dynamic design of a high intensity injector for proton linac

The Deuteron Injector Progress of the Peking University Neutron Imaging Facility Project.

Commissioning of Helium Injector for Coupled Radio Frequency Quadrupole and Separated Function Radio Frequency Quadrupole Accelerator

Development of a Radio-Frequency Quadrupole Accelerator for the HL-2A/2M Tokamak Diagnostic System

Successful High Power Acceleration of the HSC Type Injector for Cancer Therapy in IMP

RF design and study of a 325 MHz 7 MeV APF IH-DTL for an injector of a proton medical accelerator

High-throughput injection–acceleration of electron bunches from a linear accelerator to a laser wakefield accelerator

3.5 MeV Pulsed Power System for LIA Injector

External injection from a Linac into a LWFA with ~100% capture efficiency (Conference Presentation)

Beam Transport Design for a 1 MeV Prototype Dielectric Wall Accelerator

Feasibility Study and Perspectives of proton Dielectric Laser Accelerators (p-DLA): from nanosource to accelerator scheme

3D Simulations of Pre-Ionized and Two-Stage Ionization Injected Laser Wakefield Accelerators

BEAM LOADING TESTS ON DC-SC PHOTOINJECTOR AT PEKING UNIVERSITY*

DESIGN OF AN L-BAND RF PHOTOINJECTOR FOR THE IDAHO ACCELERATOR CENTER 44 MeV LINAC

Primary Beam-Loading Tests on DC–SC Photoinjector at Peking University

BEAM LOADING TESTS ON DC-SC PHOTOINJECTOR AT PEKING UNIVERSITY

Development of a 50 kV hydrogen–helium mixed ion beam implanter

Transverse Phase Space Diagnostics for Ionization Injection in Laser Plasma Acceleration Using Permanent Magnetic Quadrupoles

Achievement of high-current continuous-wave deuteron injector for Linear IFMIF Prototype Accelerator (LIPAc)

Design and Test of an RF Acceleration System Loaded with Magnetic Alloy for the Proton Synchrotron of the Xi’an Proton Application Facility