Abstract:In the selective laser melting process, metal powder melted by the laser heat source generates large instantaneous energy, resulting in transient high temperature and complex stress distribution. Different temperature gradients and anisotropy finally determine the microstructure after melting and affect the build quality and mechanical properties as a result. It is important to monitor and investigate the temperature and stress distribution evolution. Due to the difficulties in online monitoring, finite element methods (FEM) are used to simulate and predict the building process in real time. In this paper, a thermo-mechanical coupled FEM model is developed to predict the thermal behaviors of the melt pool by using Gaussian moving heat source. The model could simulate the shapes of the melt pool, distributions of temperature and stress under different process parameters through FEM. The influences of scanning speed, laser power, and spot diameter on the distribution of the melt pool temperature and stress are investigated in the SLM process of Al6063, which is widely applied in aerospace, transportation, construction and other fields due to its good corrosion resistance, sufficient strength and excellent process performance. Based on transient analysis, the relationships are identified among these process parameters and the melt pool morphology, distribution of temperature and thermal stress. It is shown that the maximum temperature at the center point of the scanning tracks will gradually increase with the increment of laser power under the effect of thermal accumulation and heat conduction, as the preceded scanning will preheat the subsequent scanning tracks. It is recommended that the parameters with optimized laser power (P = 175–200 W), scanning speed (v = 200–300 mm/s) and spot diameter (D = 0.1–0.15 mm) of aluminum alloy powder can produce a high building quality of the SLM parts under the pre-set conditions.

Numerical simulation and experimental study of the 7075 aluminum alloy during selective laser melting

Microstructure and Anisotropic Mechanical Properties of Selective Laser Melted Ti6Al4V Alloy under Different Scanning Strategies

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder

Effect of Processing Parameters on the Densification of an Additively Manufactured 2024 Al Alloy

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Study on the laser selective melting and forming process and organizational properties of a TiSi 2 -modified 7075 aluminum alloy

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Selective laser melting of Al 6061 alloy : Processing , microstructure , and mechanical properties

Microstructure and Mechanical Properties of a Novel Sc and Zr Modified 7075 Aluminum Alloy Prepared by Selective Laser Melting

Finite Element Analysis of Temperature and Stress Fields During Selective Laser Melting Process of Al–Mg–Sc–Zr Alloy

Numerical Simulation and Parametric Analysis of Selective Laser Melting Process of AlSi10Mg Powder

Effect of Processing Parameters on Tensile Properties and Microstructure of Selective Laser Melted AlSi10Mg Alloy

Computational Modeling and Experimental Validation of Thermal Stress and Melt Pool Characteristics Using High Power Laser Diode Beam on 7075 Aluminum Alloy

Finite Element Simulation and Experimental Validation of the Thermomechanical Behavior in Selective Laser Melting of Ti55531 Alloy

Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion

Effects of Annealing on the Microstructure and Mechanical Properties of Selective Laser Melted AlSi7Mg Alloy

Study of residual stress in selective laser melting of Ti6Al4V

Effect of laser process parameters on thermal behavior and residual stress of high-strength aluminum alloy processed by laser powder bed fusion

Microstructure and Mechanical Properties of Ti Modified 7075 Aluminum Alloy Fabricated by Selective Laser Melting

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Coupling Analysis on Microstructure and Residual Stress in Selective Laser Melting (SLM) with Varying Key Process Parameters