Abstract:In the selective laser melting process, metal powder melted by the laser heat source generates large instantaneous energy, resulting in transient high temperature and complex stress distribution. Different temperature gradients and anisotropy finally determine the microstructure after melting and affect the build quality and mechanical properties as a result. It is important to monitor and investigate the temperature and stress distribution evolution. Due to the difficulties in online monitoring, finite element methods (FEM) are used to simulate and predict the building process in real time. In this paper, a thermo-mechanical coupled FEM model is developed to predict the thermal behaviors of the melt pool by using Gaussian moving heat source. The model could simulate the shapes of the melt pool, distributions of temperature and stress under different process parameters through FEM. The influences of scanning speed, laser power, and spot diameter on the distribution of the melt pool temperature and stress are investigated in the SLM process of Al6063, which is widely applied in aerospace, transportation, construction and other fields due to its good corrosion resistance, sufficient strength and excellent process performance. Based on transient analysis, the relationships are identified among these process parameters and the melt pool morphology, distribution of temperature and thermal stress. It is shown that the maximum temperature at the center point of the scanning tracks will gradually increase with the increment of laser power under the effect of thermal accumulation and heat conduction, as the preceded scanning will preheat the subsequent scanning tracks. It is recommended that the parameters with optimized laser power (P = 175–200 W), scanning speed (v = 200–300 mm/s) and spot diameter (D = 0.1–0.15 mm) of aluminum alloy powder can produce a high building quality of the SLM parts under the pre-set conditions.

Thermal Dynamic Behavior During Selective Laser Melting of K418 Superalloy: Numerical Simulation and Experimental Verification

Thermal behavior in single track during selective laser melting of AlSi10Mg powder

Finite Element Analysis of Thermal Behavior and Experimental Investigation of Ti6Al4V in Selective Laser Melting

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Numerical Simulation and Parametric Analysis of Selective Laser Melting Process of AlSi10Mg Powder

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder

Experimental and computational study on thermal and fluid behaviours of powder layer during selective laser melting additive manufacturing

Mesoscopic Study of Thermal Behavior, Fluid Dynamics and Surface Morphology During Selective Laser Melting of Ti-based Composites

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Molten Pool Macroscopic Thermodynamic Analysis During Selective Laser Melting of Alsi10mg: Simulations and Experiments

Thermal Behavior and Densification Mechanism during Selective Laser Melting Additive Manufacturing of Metal Powder

Modeling of the Thermal Physical Process and Study on the Reliability of Linear Energy Density for Selective Laser Melting

Mesoscale Modelling of Selective Laser Melting: Thermal Fluid Dynamics and Microstructural Evolution

Effect Of Heat Input Parameters On Temperature Field In Inconel 718 Alloy During Selective Laser Melting

PARTICLE SCALE NUMERICAL MODELLING OF HEAT TRANSFER AND MELT POOL DYNAMICS IN SELECTIVE LASER MELTING

Fundamentals of Radiation Heat Transfer in AlSi10Mg Powder Bed During Selective Laser Melting

Numerical Simulation of the Temperature Field in Selective Laser Melting

Effects of Processing Parameters on the Temperature Field of Selective Laser Melting Metal Powder

A Numerical Study on the Mesoscopic Characteristics of Ti-6Al-4V by Selective Laser Melting

A Novel Method for the Molten Pool and Porosity Formation Modelling in Selective Laser Melting

Experimental investigation into the single-track of selective laser melting of IN625