Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Qiyang He,Huanxiong Xia,Jianhua Liu,Xiaohui Ao,Shengxiang Lin

DOI: https://doi.org/10.1016/j.matdes.2020.109115

2020-11-01

Abstract:<p>A multiphase and multi-physics model is developed for the selective laser melting process, where fluid flow, solidification, and heat transfer are included. The discrete-element and volume-of-fluid methods are applied to generate the powder bed and capture the free surface of the melts, respectively. Physical behaviors like surface tension, Marangoni effect, vapor recoil, and radiation are considered. A strategy that the heat source is allowed adaptively following the free surface of a molten pool along with power leakage-free is developed for the moving laser. The fundamental characteristics of the molten pool and solidified tracks are found and analyzed. The remolten region between two neighboring tracks in the horizontal and vertical directions is predicted, and the effects of the scanning spacing and laser power on the width and depth of the remolten region are investigated. The results indicate that both the dimensions of the molten pool and remolten region depend on the process parameters anisotropically, varying the laser energy input could change the dynamic regime of a molten pool, and the pore defect can appear between adjacent tracks when using a large scanning spacing.</p>

materials science, multidisciplinary

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to study the fluid flow, solidification and heat transfer phenomena in the Selective Laser Melting (SLM) process by developing a high - fidelity multiphase and multiphysics mesoscale model. Specifically, this research aims to:

1. **Model establishment**: Develop a multiphysics mesoscale model that can describe multiphase flow, solidification and heat transfer in the SLM process. This model takes into account physical behaviors such as surface tension, Marangoni effect, and vapor recoil.

2. **Simulate complex phenomena**: Use the Discrete Element Method (DEM) to generate the powder bed and use the Volume of Fluid (VOF) method to capture the free surface of the molten pool. The model also takes into account other physical phenomena such as radiation.

3. **Predict the remelting area**: Simulate objects with double - track and double - layer structures and predict the remelting area. Study the influence of the scanning spacing and laser power on the width and depth of the remelting area.

4. **Analyze defects**: Explore the influence of the scanning spacing and laser power on pore defects, especially when a larger scanning spacing is used, pore defects may occur between adjacent tracks.

Through these studies, the paper aims to provide a high - quality model for the prediction of the micromorphology in the SLM process, which is helpful for understanding, controlling the morphology and optimizing grain growth.