Abstract:As the absorption energy distribution is mainly determined by the heat source modelling, a heat source model capable of estimating precisely the distribution of absorbed laser energy is essential for the accuracy and reliability of computational simulations. In most existing mesoscale selective laser melting (SLM) modelling with ray tracing technology, laser energy has been treated as a surface heat source and laser energy absorption only occurs at reflection points in surface elements, leading to unphysical absorption energy distribution and localized temperature overestimation with extremely high peak. Here we propose a new heat source model incorporating both laser penetration and ray tracing, and accurately estimate the absorption energy distribution by calculating the laser energy attenuation during laser propagation in metal. The modified ray tracing scheme constructed here is capable of tracing ray propagation through different media and across interfaces. Computational simulations on SLM with different powder bed densities are carried out. Compared to the conventional surface heat source model in SLM simulations, our new heat source model reduces the high peak temperature of elements with low liquid volume fraction, guarantees the simulation success and eliminates the overestimation of the evaporation heat loss. Melt pool volume and depth as well as the recoil pressure is also characterized. A comparison between simulations and experimental results indicate that the proposed new heat source model is also capable of simulating the surface temperature of metal substrates upon heating pulse. In addition, keyhole morphologies from experimental observation and numerical simulations based on the proposed model are in good agreement.

A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)

Discrepancies between Gaussian surface heat source model and ray tracing heat source model for numerical simulation of selective laser melting

New Heat Source Model for Accurate Estimation of Laser Energy Absorption Near Free Surface in Selective Laser Melting

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool

A new heat source model for selective laser melting simulations based on energy distribution on the powder layer and the surface of substrate

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

On the importance of heat source model determination for numerical modeling of selective laser melting of IN625

Melt pool evolution and microstructure simulation of SLM 316L based on SPH-PFM coupling model

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)

Modeling and simulation of metal selective laser melting process: a critical review

Research Status of Numerical Simulation of Selective Laser Melting Process at Home and Abroad

Powder-scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method

Two-dimensional heat transfer and melt flow in the laser-impact zone at selective laser melting of thin walls -- II: Modeling

Heat transfer model and finite element formulation for simulation of selective laser melting

Modelling and Numerical Simulation During Selective Laser Melting of Stainless Steel 316L Via Particle by Particle Approach

Numerical Modelling and Experimental Validation of Selective Laser Melting Processes Using a Custom Argon Chamber Setup for 316L Stainless Steel and Ti6AI4V

Finite Element Analysis and Computational Fluid Dynamics Verification of Molten Pool Characteristics During Selective Laser Melting of Ti-6Al-4V Plates

Predicting the Porosity Defects in Selective Laser Melting (SLM) by Molten Pool Geometry

Numerical Simulation of Selective Laser Melting Based on SPH Method

A Generalized Feed Forward Dynamic Adaptive Mesh Refinement and Derefinement Finite Element Framework for Metal Laser Sintering—Part I: Formulation and Algorithm Development