Abstract:<p>During laser powder bed fusion additive manufacturing, laser power absorption is governed by a protean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their instantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we focus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser absorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 µs due to a dramatic change in the vapor depression aspect ratio – an event known to create porosity. As several industrial scan strategies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addition to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.</p>

New Heat Source Model for Accurate Estimation of Laser Energy Absorption Near Free Surface in Selective Laser Melting

A new heat source model for selective laser melting simulations based on energy distribution on the powder layer and the surface of substrate

Discrepancies between Gaussian surface heat source model and ray tracing heat source model for numerical simulation of selective laser melting

A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)

A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool

On the importance of heat source model determination for numerical modeling of selective laser melting of IN625

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Modeling and numerical studies of selective laser melting: Multiphase flow, solidification and heat transfer

Selective Laser Melting of Typical Metallic Materials: an Effective Process Prediction Model Developed by Energy Absorption and Consumption Analysis

An Analytical Model for Rapid Predicting Molten Pool Geometry of Selective Laser Melting (SLM)

Heat transfer model and finite element formulation for simulation of selective laser melting

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Influence of the free surface reconstruction on the spatial laser energy distribution in high power laser beam welding modeling

Powder-scale Multi-Physics Modeling of Multi-Layer Multi-Track Selective Laser Melting with Sharp Interface Capturing Method

Two-dimensional heat transfer and melt flow in the laser-impact zone at selective laser melting of thin walls -- II: Modeling

Numerical Simulation of Selective Laser Melting Based on SPH Method

The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates

Development of a Comprehensive Model for Predicting Melt Pool Characteristics with Dissimilar Materials in Selective Laser Melting Processes

Multiscale Modeling of Electron Beam and Substrate Interaction: a New Heat Source Model

Efficient reduced-order thermal modelling of scanning laser melting for additive manufacturing