Abstract:Laser assisted cold spraying (LACS) is a promising technology for preparing high performance copper-steel composite materials for grounding electrode applications. Laser power is a critical LACS parameter, however, in literature there is a lack of studies on the influence of laser power on coatings. In this study, the effect of laser power on microstructure and properties of LACS copper coatings on steel is investigated. The results show that with the increase of laser power, the copper coating generally shows reduced porosity and microhardness, as well as increased bonding strength . However, the grains are first refined and then coarsened, while the electrical conductivity and corrosion resistance both increased and then decreased. This is because when the laser power exceeds 4 kW, the grain is coarsened and the amount of large angular grain boundaries (HAGBs) increases because excessive temperature increases the recrystallization driving force, ultimately leading to decrease in coating electrical conductivity and corrosion resistance. 4.0 kW, 5 MPa, 800 °C is considered as optimal LACS parameters for preparation of pure copper coatings on Q235 steel. The coating has a porosity of <0.04 %, grain size of 0.634 μm, microhardness of 99.4HV 0.1 , bonding strength exceeds 62 MPa, electrical conductivity of 99 % IACS, and corrosion current density of 6.092 × 10 −8 A/cm 2 . In addition, mechanisms of LACS particle deposition and corrosion of copper coatings in simulated soil solution were discussed. With the increase of laser power, more heat absorbed by the powder and the substrate promotes thermal softening and plastic deformation, resulting in stronger mechanical bonding. The corrosion mechanism gradually changes from pitting corrosion to uniform corrosion due to the reduced porosity and tighter grain boundaries, and finally to intergranular corrosion due to grain coarsening and high HAGBs content. Overall, this study provides guidance and reference for the practical application of LACS.

Effect of laser power on the microstructure and mechanical properties of laser-assisted cold sprayed 7075 aluminum alloy deposits

Laser Assisted Cold Spray of Aluminum Alloy 6061: Experimental Results

Microstructure and Properties of 7075/al2o3 Composite Coatings Prepared by Supersonic Laser Deposition

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Effect of ultra-high-speed laser melting deposition process on performance of Al-Mg-Sc high-strength aluminum alloy

Effect of Powder Spreading Parameters on Laser Absorption Behavior and Processability of High‐Strength Aluminum Alloy Fabricated by Laser Powder Bed Fusion

Recover the Tensile Strength of Hard Aluminum Alloy Through Laser Assisted Cold Spray

Microstructure and property enhancement of 7075 aluminium alloy via laser metal deposition augmented by in-situ ultrasonic vibration

Comparative study on microstructure and electrochemical corrosion resistance of Al7075 alloy prepared by laser additive manufacturing and forging technology

Study of microstructural and mechanical anisotropy of 7075 Al deposits fabricated by cold spray additive manufacturing

Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion

Effect of laser shock peening on the high-temperature fatigue performance of 7075 aluminum alloy

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Numerical simulation and experimental study of the 7075 aluminum alloy during selective laser melting

Increasing strength and fracture toughness of AA7075-T6 adhesively-bonded joints with laser ablation

Effect of laser power on microstructure and properties of laser assisted cold sprayed copper coatings on steel

Effect of Laser Strengthening on Electrochemical Corrosion of AA6082 Aluminum Alloy

Effect of Process Parameters on the Hardness of Laser Surface Textured 5A06 Aluminum Alloy

Effects of Laser Shock Peening on Interfacial Bonding Strength of Cold-Sprayed Coating

A review of laser additive manufacturing (LAM) aluminum alloys: Methods, microstructures and mechanical properties

Microstructural and mechanical characteristics of direct laser welding 7075 super hard aluminum alloy/ D6AC ultra-high strength alloy structural steel