Abstract:In this study on multi-nanosheet field-effect transistor (mNS-FET)-one of the gate-all-around FETs (GAAFET) in the 3 nm technology node dimension-3D TCAD (technology computer-aided design) was used to attain optimally reduced substrate leakage from options including a punch-through-stopper (PTS) doping scheme and a bottom oxide (BO) scheme for bottom isolation, with the performance improvement being shown in the circuit-level dynamic operation using the mNS-FET. The PTS doping concentration requires a high value of >5 × 1018 cm-3 to reduce gate induced drain leakage (GIDL), regardless of the presence or absence of the bottom isolation layer. When the bottom isolation is applied together with the PTS doping scheme, the capacitance reduction is larger than the on-state current reduction, as compared to when only the PTS doping concentration is applied. The effects of such transistor characteristics on the performance and capabilities of various circuit types-such as an inverter ring oscillator (RO), a full adder (FA) circuit, and a static random-access memory (SRAM)-were assessed. For the RO, applying BO along with the PTS doping allows the operating speed to be increased by 11.3% at the same power, or alternatively enables 26.4% less power consumption at the same speed. For the FA, power can be reduced by 6.45%, energy delay product (EDP) by 21.4%, and delay by 16.8% at the same standby power when BO and PTS are both applied. Finally, for the SRAM, read current (IREAD) increased by 18.7% and bit-line write margin (BWRM) increased by 12.5% at the same standby power. Through the circuit simulations, the Case 5 model (PTS doping concentration: 5.1 × 1018 cm-3, with BO) is the optimum condition for the best device and circuit performance. These observations confirm that PTS and bottom isolation applications in mNS-FETs can be utilized to enable the superior characteristics of such transistors to translate into high performance integrated circuits.

Design technique co-optimization approach to GAA FETs for inverter design at advanced technology node

In-Depth DTCO Analysis on Scaling Gate-All-Around Nanosheets/Nanowires for 20 Å Node and Beyond Technologies

Design Technology Co-Optimization for Gate-All-Around Nanosheet Transistors Considering Source/Drain Confinement and Post- Gate Single Diffusion Break

Improved MEOL and BEOL Parasitic-Aware Design Technology Co-Optimization for 3 Nm Gate-All-Around Nanosheet Transistor

Impact of Process Variation on Nanosheet Gate-All-Around Complementary FET (CFET)

NS-GAAFET Compact Modeling: Technological Challenges in Sub-3-nm Circuit Performance

Design and Performance Optimization of Dopingless Vertical Nanowire TFET Using Gate Stacking Technique

Inflection Points in GAA NS-FET to C-FET Scaling Considering Impact of DTCO Boosters

Improved DC Performances of Gate-all-around Si-Nanotube Tunnel FETs Using Gate-Source Overlap

Design and Analysis of Gate Stack Silicon-on-Insulator Nanosheet FET for Low Power Applications

Gate-all-around NWFETs vs. triple-gate FinFETs: Junctionless vs. extensionless and conventional junction devices with controlled EWF modulation for multi-VT CMOS

A Machine Learning Approach for Optimization of Channel Geometry and Source/Drain Doping Profile of Stacked Nanosheet Transistors

Modeling, optimization and comprehensive comparative analysis of 7nm FinFET and 7nm GAAFET devices

Compact Modeling of Process Variations in Nanosheet Complementary FET (CFET) and Circuit Performance Predictions

DC and AC characteristics of Si/SiGe based vertically stacked complementary-tunneling FETs

Real-Time Optimization Design of GAAFETs Based on Machine Learning Method

New Insights Into The Near-Threshold Design In Nanoscale Finfet Technology For Sub-0.2v Applications

Introduction of Gate-All-Around FET (GAAFET)

Statistical Device Simulation and Machine Learning of Process Variation Effects of Vertically Stacked Gate-All-Around Si Nanosheet CFETs

Design of Complementary GAA-NW Tunneling-Fets of Axial Si-Ge Heterostructure

Optimization of Gate-All-Around Device to Achieve High Performance and Low Power with Low Substrate Leakage