Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

Difficulties in Producing CT Caused by the Current Ratio Regulation in IEC Standard and Suggestions of Modification

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Approach of Obtaining the Error of Current Transformers Through the Measurement of Turns Correction Factor and Impedance

Discuss on the Necessity of the Reduction of Current Transformer's Capacity

Discussion of the Significance on Reducing the Capacity of Electromagnetic Current Transformers

Design of Current Transformer for <italic>in Situ</italic> Current Measurement of Discrete SiC Power Devices

On-line Demagnetization Method for an Iron Core CT

A high accuracy current comparator with electronic compensation

MAGNETIC RESTRAINING DIFFERENTIAL BUS PROTECT

Impedance Measurement Method for Obtaining the Accuracy of Current Transformers

A novel measurement‐protection‐integrated current transformer based on hybrid core and magnetic field sensor

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Assessment of Iec 60034-2-1 in Determining Induction Machine Efficiency

Design of Current Transformer for In Situ Switching Current Measurement of Discrete SiC Power Devices

Impact of strip winding tension on ultracrystalline magnetic core for current transformer

Experimental investigation on the performances of electronic current transformers

Double Air-gap Current Transformer Applied to High Voltage Transmission Line On-site Mobile Comparison System

Electronic Current Transformer Based on Low-power Current Transformer

Design and realization of an electronic current transformer applied in GIS

Online Measurement Method and System of Excitation Impedance of Current Transformers Based on Norton's Theorem and Differential Method to Measure Difference of Two Currents

Online Measurement Method and System of Excitation Impedance of Current Transformers Based on Norton’s Theorem and Differential Method to Measure Difference of Two Currents