Abstract:Conventional current transformers (CTs) suffer from nonlinearities due to their ferromagnetic cores. On one hand, it is well-known that severe core saturation may occur because of large overcurrents or unidirectional transient components: this may substantially impact the operation of relays. On the other hand, weaker nonlinear effects are also present during regular working conditions. In particular, the spectral content of typical current waveforms is characterized by a strong fundamental term responsible for harmonic distortion affecting the frequency components at the secondary side. In turn, this has a significant impact on the accuracy that can be reached as long as current harmonics must be monitored. The target of this work is implementing a simple signal processing technique that allows compensating for this effect. The method, characterized by extremely low computational complexity, is first introduced and validated using numerical simulations. After this, it was tested experimentally to improve the harmonic measurement capability of inductive CTs. The achieved results highlight a noticeable reduction of errors at low-order harmonics over a wide range of primary current amplitudes. It is worth noting that the black-box approach makes the technique suitable also for compensating nonlinearities introduced by current transducers based on different operating principles. Thanks to this peculiarity and to the low computational complexity, the proposed method is suitable to be employed in power quality analyzers and merging units. In this way, high-accuracy monitoring of current harmonics in power systems can be achieved, opening the way to advanced power quality management and to the location of disturbing users.

Impedance Measurement Method for Obtaining the Accuracy of Current Transformers

Approach of Obtaining the Error of Current Transformers Through the Measurement of Turns Correction Factor and Impedance

Online Measurement Method and System of Excitation Impedance of Current Transformers Based on Norton's Theorem and Differential Method to Measure Difference of Two Currents

Online Measurement Method and System of Excitation Impedance of Current Transformers Based on Norton’s Theorem and Differential Method to Measure Difference of Two Currents

A New Method to Represent the Harmonic Measurement Accuracy of Current Transformers

A high accuracy current comparator with electronic compensation

A High-Precision Error Calibration Technique for Current Transformers under the Influence of DC Bias

Perturbation Amplitudes Design Method Based on Confidence Interval Evaluation for Impedance Measurement

Research on Time-Domain Transfer Impedance Measurement Technology for High Frequency Current Transformers in Partial Discharge Detection of Cables

High-frequency Equivalent Circuit Modeling for Overvoltage Detection

Design of Current Transformer for <italic>in Situ</italic> Current Measurement of Discrete SiC Power Devices

A Calibration Method for Power Metering System with Electronic Instrument Transformers

Research on Non-Invasive Voltage Measurement Method Based on Impedance Adaptation

A Novel Method for DC Current Measurement Using Current Transformer

Modeling Method of High-frequency Equivalent Circuit of Current Transformer for Overvoltage Detection

Design Method of Multisine Signal for Broadband Impedance Measurement

AUTOMATIC MEASUREMENT AND CALIBRATION OF DC CURRENT RATIO ERROR

Research on the Methods of Measuring High Frequency Small Current in Large Power Frequency Current by Current Transformer

On-line Monitoring of Current Transformer Dielectric Loss Based on Absolute Measurement

A Simple Method for Compensating Harmonic Distortion in Current Transformers: Experimental Validation

A Novel Current Transformer Based on Virtual Air Gap and Its Basic Measuring Characteristics