Abstract:A novel gradient fluorination strategy creates a thin yet robust LiF‐rich cathode electrolyte interface (CEI), amplifying stability for lithium‐rich oxides. This innovative CEI engineering boosts oxygen participation in redox reactions, curtails oxygen release, and structural transition. The cathode delivers heightened rate performance (133 mAh g−1 at 5 C), exceptional cycling stability (81.9% retention after 100 cycles at 1 C), and reduced voltage fade (1.75 mV per cycle). Despite their ultrahigh specific capacity, lithium‐rich layered oxide cathodes are still plagued by challenges such as poor cycle stability and notorious voltage decay, which are primarily attributed to surface issues such as the release of lattice oxygen and interfacial side reactions. In this study, a facial strategy of gradient fluorination is adopted to construct a thin but robust LiF‐rich cathode electrolyte interface (CEI), highly enhancing the stability of the interface of lithium‐rich oxides. Experimental results and theoretical calculations both demonstrate that the stable CEI not only promotes oxygen participation in redox reactions and simultaneously inhibits oxygen release and structural transition, but also facilitates the transport kinetics of lithium ions. As a result, the gradient fluorinated lithium‐rich cathode delivers highly enhanced rate performance (133 mAh g−1 at 5 C), superior cycling stability with a capacity retention of 81.9% after 100 cycles at 1 C (250 mAh g−1), and alleviated voltage fade (only 1.75 mV per cycle). Moreover, a unique formation mechanism for LiF‐rich surfaces is proposed according to theoretical calculations. This work not only provides a fresh understanding of the CEI formation mechanism, but also show a promising avenue for designing LiF‐rich CEIs applicable to other layered oxide cathodes.

Ultrathin dense LiF coverage coupled with a near-surface gradient fluorination lattice enables fast-charging long-life 4.6 V LiCoO 2

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Ultrathin dense LiF coverage coupled with a near-surface gradient fluorination lattice enables fast-charging long-life 4.6 V LiCoO<sub>2</sub>

Regulating Electrode/electrolyte Interfacial Chemistry Enables 4.6 V Ultra-Stable Fast Charging of Commercial LiCoO2

Enhanced 4.7 V Electrochemical Performance of the LiCoO2 Cathode Via a Fluoride and LiCo1–xAlxO2 Composite Coating

Interfacial Design for a 4.6 V High‐Voltage Single‐Crystalline LiCoO2 Cathode

Cathode Electrolyte Interface Engineering by Gradient Fluorination for High‐Performance Lithium Rich Cathode

Fluorine-Terminated Self-Assembled Monolayers Grafted Graphite Anode Inducing a LiF-Dominated SEI Inorganic Layer for Fast-Charging Lithium-Ion Batteries.

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Sn, S co-doped LiCoO 2 with low lithium ion diffusion energy barrier and high passivation surface for fast charging lithium ion batteries

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Facile Formation of a LiF-Carbon Layer as an Artificial Cathodic Electrolyte Interphase through Encapsulation of a Cathode with Carbon Monofluoride

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

In-situ reconstructed surface/inner-structure synergistic design enabling 4.6 V LiCoO 2 cathode for all-solid-state thin-film battery

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Interfacial Fluoride Engineering Enabled Robust LiF-rich Solid Electrolyte Interphase to Reduce Active Lithium Loss in Rechargeable Lithium Battery

Fluorinated Rocksalt Cathode with Ultra‐high Active Li Content for Lithium‐ion Batteries

Fluorinating All Interfaces Enables Super-Stable Solid-State Lithium Batteries by in Situ Conversion of Detrimental Surface Li2CO3