Abstract:Charging lithium cobalt oxide (LCO) cathodes to high voltage results in a significant increase in the battery's energy density, however, leads to its fast failure due to irreversible side reactions. The combination of fluorinated electrolytes solutions with a Li–Al–F surface coating effectively stabilizes both the cathode and the anode, hence enhancing the long‐term performance of 4.6 V LCO cells. The need for high power density cathodes for Li‐ion batteries can be fulfilled by application of a high charging voltage above 4.5 V. As lithium cobalt oxide (LCO) remains a dominant commercial cathode material, tremendous efforts are invested to increase its charging potential toward 4.6 V. Yet, the long‐term performance of high voltage LCO cathodes still remains poor. Here, an integrated approach combining the application of an aluminum fluoride coating and the use of electrolyte solutions comprising 1:1:8 mixtures of difluoroethylene:fluoroethylene carbonate:dimethyl carbonate and 1 m LiPF6 is reported. This results in superior behavior of LCO cathodes charged at 4.6 V with high initial capacity of 223 mAh g−1, excellent long‐term performance, and 78% capacity retention after 500 cycles. Impressive stability is also found at 450 °C with an initial capacity of 220 mAh g−1 and around 84% capacity retention after 100 cycles. Systematic post‐mortem analysis of LCO cathodes and Li anodes after prolonged cycling reveals two main degradation routes related to changes at the surface of the cathodes and formation of passivation layers on the anodes. This study demonstrates the importance of appropriate selection of electrolyte solutions and development of effective coatings for improved performance of high voltage LCO‐based Li batteries.

Regulating Electrode/electrolyte Interfacial Chemistry Enables 4.6 V Ultra-Stable Fast Charging of Commercial LiCoO2

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Ultrathin dense LiF coverage coupled with a near-surface gradient fluorination lattice enables fast-charging long-life 4.6 V LiCoO<sub>2</sub>

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Regulating solvated sheath with anion chelant enables 4.6 V ultra‐stable commercial LiCoO2

Towards Extreme Fast Charging of 4.6 V LiCoO2 Via Mitigating High-Voltage Kinetic Hindrance

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

Enabling Stable High‐Voltage LiCoO2 Operation by Using Synergetic Interfacial Modification Strategy

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Competitive Design of Weakly Solvated Electrolyte Enables Stable Cycling of 4.6 V LiCoO2

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Synergistic Effects of Co-Additives in Constructing a Robust and Li+-conductive Interphase for High-Voltage LiCoO2

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Enabling Stable 4.6 V LiCoO2 Cathode Through Oxygen Charge Regulation Strategy

Sn, S co-doped LiCoO 2 with low lithium ion diffusion energy barrier and high passivation surface for fast charging lithium ion batteries

An Effective Electrolyte Strategy to Improve the High-Voltage Performance of LiCoO2 Cathode Materials

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Multi-scale stabilization of high-voltage LiCoO2 enabled by nanoscale solid electrolyte coating

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection