Abstract:Charging lithium cobalt oxide (LCO) cathodes to high voltage results in a significant increase in the battery's energy density, however, leads to its fast failure due to irreversible side reactions. The combination of fluorinated electrolytes solutions with a Li–Al–F surface coating effectively stabilizes both the cathode and the anode, hence enhancing the long‐term performance of 4.6 V LCO cells. The need for high power density cathodes for Li‐ion batteries can be fulfilled by application of a high charging voltage above 4.5 V. As lithium cobalt oxide (LCO) remains a dominant commercial cathode material, tremendous efforts are invested to increase its charging potential toward 4.6 V. Yet, the long‐term performance of high voltage LCO cathodes still remains poor. Here, an integrated approach combining the application of an aluminum fluoride coating and the use of electrolyte solutions comprising 1:1:8 mixtures of difluoroethylene:fluoroethylene carbonate:dimethyl carbonate and 1 m LiPF6 is reported. This results in superior behavior of LCO cathodes charged at 4.6 V with high initial capacity of 223 mAh g−1, excellent long‐term performance, and 78% capacity retention after 500 cycles. Impressive stability is also found at 450 °C with an initial capacity of 220 mAh g−1 and around 84% capacity retention after 100 cycles. Systematic post‐mortem analysis of LCO cathodes and Li anodes after prolonged cycling reveals two main degradation routes related to changes at the surface of the cathodes and formation of passivation layers on the anodes. This study demonstrates the importance of appropriate selection of electrolyte solutions and development of effective coatings for improved performance of high voltage LCO‐based Li batteries.

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

Regulating solvated sheath with anion chelant enables 4.6 V ultra‐stable commercial LiCoO2

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Improved Stability of Single‐Crystal LiCoO2 Cathodes at 4.8 V through Solvation Structure Regulation

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Superior stable high‐voltage LiCoO2 enabled by modification with a layer of lithiated polyvinylidene fluoride‐derived LiF

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

External-to-internal Synergistic Strategy to Enable Multi-Scale Stabilization of LiCoO2 at High-Voltage

Weakened Solvation Structure Electrolytes Enable High-Voltage Graphite||LiCoO2 Batteries

Enabling Stable High‐Voltage LiCoO2 Operation by Using Synergetic Interfacial Modification Strategy

Preventing the Distortion of CoO6 Octahedra of LiCoO2 at High-Voltage Operation of Lithium-Ion Battery: An Organic Surface Reinforcement