Abstract:Charging lithium cobalt oxide (LCO) cathodes to high voltage results in a significant increase in the battery's energy density, however, leads to its fast failure due to irreversible side reactions. The combination of fluorinated electrolytes solutions with a Li–Al–F surface coating effectively stabilizes both the cathode and the anode, hence enhancing the long‐term performance of 4.6 V LCO cells. The need for high power density cathodes for Li‐ion batteries can be fulfilled by application of a high charging voltage above 4.5 V. As lithium cobalt oxide (LCO) remains a dominant commercial cathode material, tremendous efforts are invested to increase its charging potential toward 4.6 V. Yet, the long‐term performance of high voltage LCO cathodes still remains poor. Here, an integrated approach combining the application of an aluminum fluoride coating and the use of electrolyte solutions comprising 1:1:8 mixtures of difluoroethylene:fluoroethylene carbonate:dimethyl carbonate and 1 m LiPF6 is reported. This results in superior behavior of LCO cathodes charged at 4.6 V with high initial capacity of 223 mAh g−1, excellent long‐term performance, and 78% capacity retention after 500 cycles. Impressive stability is also found at 450 °C with an initial capacity of 220 mAh g−1 and around 84% capacity retention after 100 cycles. Systematic post‐mortem analysis of LCO cathodes and Li anodes after prolonged cycling reveals two main degradation routes related to changes at the surface of the cathodes and formation of passivation layers on the anodes. This study demonstrates the importance of appropriate selection of electrolyte solutions and development of effective coatings for improved performance of high voltage LCO‐based Li batteries.

Synergistic effect of fluorinated solvent and Mg2+ enabling 4.6 V LiCoO2 performances

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Synergistic-effect of diluent to reinforce anion-solvation-derived interfacial chemistry for 4.5 V−class Li||LiCoO2 batteries

Additive Evolved Stabilized Dual Electrode-Electrolyte Interphases Propelling the High-Voltage Li||LiCoO 2 Batteries up to 4.7V

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Regulating solvated sheath with anion chelant enables 4.6 V ultra‐stable commercial LiCoO2

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Bimetallic synergistic modified layer promotes the cyclic stability of LiCoO 2 under 4.6 V high voltage

Phosphate-Rich Interface for a Highly Stable and Safe 4.6 V LiCoO2 Cathode

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection

Constructing Solid Electrode-Electrolyte Interfaces in High-Voltage Li| LiCoO2 Batteries under Dual-Additive Electrolyte Synergistic Effect

Ultrathin dense LiF coverage coupled with a near-surface gradient fluorination lattice enables fast-charging long-life 4.6 V LiCoO<sub>2</sub>