Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

Stable Cycling of LiCoO2 at 4.55 V Enabled by Combined Mg Doping and Surface Coating of NASICON-type Electrolyte

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Ultrahigh‐voltage LiCoO2 at 4.7 V by Interface Stabilization and Band Structure Modification

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Bimetallic synergistic modified layer promotes the cyclic stability of LiCoO 2 under 4.6 V high voltage

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Synthesis of co-doped high voltage lithium cobalt oxide with high rate electrochemical performance

Double function-layers construction strategy promotes the cycling stability of LiCoO2 under high temperature and high voltage

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

Multi-scale stabilization of high-voltage LiCoO2 enabled by nanoscale solid electrolyte coating