Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

A Novel Bifunctional Self‐Stabilized Strategy Enabling 4.6 V LiCoO2 with Excellent Long‐Term Cyclability and High‐Rate Capability

Mitigating Lattice Distortion of High-Voltage LiCoO2 via Core-Shell Structure Induced by Cationic Heterogeneous Co-Doping for Lithium-Ion Batteries

Stable Cycling of LiCoO2 at 4.55 V Enabled by Combined Mg Doping and Surface Coating of NASICON-type Electrolyte

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

Interplay between multiple doping elements in high-voltage LiCoO<sub>2</sub>

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Co/Li-dual-site doping towards LiCoO 2 as a high-voltage, fast-charging, and long-cycling cathode material

Synthesis of co-doped high voltage lithium cobalt oxide with high rate electrochemical performance

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

Improving the Cycle Stability of LiNiO2 through Al3+ Doping and LiAlO2 Coating

Unraveling the Distinct Roles of Mg Occupation on Li or Co Sites on High-Voltage LiCoO 2

Excellent electrochemical properties of Ni-rich LiNi0.88Co0.09Al0.03O2 cathode materials co-modified with Mg-doping and LiBO2-coating for lithium ion battery