Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Practical Surface-Reconstruction Strategy Based on Self-Reactive Interface Design Enables Ultralong Cyclability of Commercial Cathodes for Lithium-Ion Batteries

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

<i>In</i><i>-situ</i> constructed protective bilayer enabling stable cycling of LiCoO<sub>2</sub> cathode at high-voltage

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

Mechanochemically Robust LiCoO<sub>2</sub> with Ultrahigh Capacity and Prolonged Cyclability

Modulating the Spin State to Stabilize the Surface and Bulk Structure for Durable 4.6 V LiCoO2 Cathodes

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

Promoting Surface Electric Conductivity for High-Rate LiCoO<sub>2</sub>

Tuning surface chemistry to reduce the step-like degradation of LiCoO<sub>2</sub> at 4.6 V

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

Double function-layers construction strategy promotes the cycling stability of LiCoO2 under high temperature and high voltage

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V