Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

Diffusion‐Optimized Long Lifespan 4.6 V LiCoO2: Homogenizing Cycled Bulk‐To‐Surface Li Concentration with Reduced Structure Stress

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

Collective Surface Enabling an Ultralong Life of LiCoO2 at High Voltage and Elevated Temperature

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Multiple Surface Optimizations for a Highly Durable LiCoO2 beyond 4.6 V

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Multiple Surface Optimizations for a Highly Durable LiCoO<sub>2</sub> beyond 4.6 V

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Ultrathin dense LiF coverage coupled with a near-surface gradient fluorination lattice enables fast-charging long-life 4.6 V LiCoO<sub>2</sub>

Lithium-Aluminum-Phosphate Coating Enables Stable 4.6 V Cycling Performance of LiCoO2 at Room Temperature and Beyond

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Long‐Term Highly Stable High‐Voltage LiCoO2 Synthesized via a Solid Sulfur‐Assisted One‐Pot Approach

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection

Superior stable high‐voltage LiCoO2 enabled by modification with a layer of lithiated polyvinylidene fluoride‐derived LiF

Highly stable operation of LiCoO2 at cut-off ≥ 4.6 V enabled by synergistic structural and interfacial manipulation

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Tuning Surface Chemistry to Reduce the Step-Like Degradation of LiCoO2 at 4.6 V