Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

High‐Entropy Surface Complex Stabilized LiCoO2 Cathode

High-entropy doping for high-voltage LiCoO 2 with enhanced electrochemical performances

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Hybrid ion/electron interfacial regulation stabilizes the cobalt/oxygen redox of ultrahigh-voltage lithium cobalt oxide for fast-charging cyclability

Stable Cycling of LiCoO2 at 4.55 V Enabled by Combined Mg Doping and Surface Coating of NASICON-type Electrolyte

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

Synthesis of co-doped high voltage lithium cobalt oxide with high rate electrochemical performance

Achieving high structure and voltage stability in cobalt-free Li-rich layered oxide cathodes via selective dual-cation doping

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages

Engineering the Surface of LiCoO 2 Electrodes Using Atomic Layer Deposition for Stable High-Voltage Lithium Ion Batteries

LiMgPO<sub>4</sub>-Coating-Induced Phosphate Shell and Bulk Mg-Doping Enables Stable Ultra-High-Voltage Cycling of LiCoO<sub>2</sub> Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Suppressing Surface Ligand-to-Metal Charge Transfer Toward Stable High-Voltage LiCoO2.

Surface Passivation of LiCoO2 by Solid Electrolyte Nanoshell for High Interfacial Stability and Conductivity