Abstract:A new strategy; cation and anion dual gradient, is proposed and successfully constructed at the surface of LiCoO2 to minimize the highly oxidized Co4+ and O− species when charged to high potentials, which not only suppresses the relevant surface side reactions, but also affected the Li+ diffusion kinetics through the induced spinel‐like surface structure, making LiCoO2 exhibit excellent cycling stability and rate capability at the high cutoff voltage of 4.6 V, further validated in the 4.55 V pouch full cell (equivalent to 4.6 V vs Li/Li+).LiCoO2 (LCO) is the most successful cathode material for commercial lithium‐ion batteries. Cycling LCO to high potentials up to 4.5 V or even 4.6 V can significantly elevate the capacity but cause structural degradation due to the serious surface side reaction between the highly oxidized Co4+ and O− species with organic electrolytes. To tackle this concern, a new strategy, constructing cation and anion dual gradients at the surface of LCO (DG‐LCO), is proposed. Specifically, the electrochemically inactive cation and anion are selected to substitute Co3+ and O2− at the surface in a gradated manner, thus minimizing the highly oxidized Co4+ and O− species at high potentials and suppressing the induced surface side reactions. Unexpectedly, this dual gradient design leads to a spinel‐like surface structure coherently with bulk layered structure, which facilitates Li+ diffusion kinetics. Thus, DG‐LCO achieves high capacity and excellent cycling stability at 4.6 V (≈216 mA h g−1 at 0.1 C, a capacity retention of 88.6% after 100 cycles in 1.8 A h pouch full cell at 1 C), as well as improved rate capability (≈140 mA h g−1 at 5 C). These studies provide useful guidelines for future design of cathode materials with long lifespan and high rate capability.

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

A Compact Interphase Involving a Reversible Redox Couple Stabilizes a 4.6 V LiCoO2 Cathode

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Stabilizing LiCoO<sub>2</sub> at 4.6 V by regulating anti-oxidative solvents

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Constructing Solid Electrode-Electrolyte Interfaces in High-Voltage Li| LiCoO2 Batteries under Dual-Additive Electrolyte Synergistic Effect

Stabilizing LiCoO2 at 4.6 V by regulating anti-oxidative solvents

Electrolyte regulating and interface engineering for high voltage LiCoO2 lithium metal batteries

Interfacial Design for a 4.6 V High‐Voltage Single‐Crystalline LiCoO2 Cathode

Stabilizing High-Voltage LiCoO2 Cathode in Aqueous Electrolyte with Interphase-forming Additive

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Regulating Electrode/electrolyte Interfacial Chemistry Enables 4.6 V Ultra-Stable Fast Charging of Commercial LiCoO2

Improved Stability of Single‐Crystal LiCoO2 Cathodes at 4.8 V through Solvation Structure Regulation

Phosphate-Rich Interface for a Highly Stable and Safe 4.6 V LiCoO2 Cathode

Conductive Li+ Moieties‐Rich Cathode Electrolyte Interphase with Electrolyte Additive for 4.6 V Well‐Cycled Li||LiCoO2 Batteries

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO 2

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2