Abstract:A novel gradient fluorination strategy creates a thin yet robust LiF‐rich cathode electrolyte interface (CEI), amplifying stability for lithium‐rich oxides. This innovative CEI engineering boosts oxygen participation in redox reactions, curtails oxygen release, and structural transition. The cathode delivers heightened rate performance (133 mAh g−1 at 5 C), exceptional cycling stability (81.9% retention after 100 cycles at 1 C), and reduced voltage fade (1.75 mV per cycle). Despite their ultrahigh specific capacity, lithium‐rich layered oxide cathodes are still plagued by challenges such as poor cycle stability and notorious voltage decay, which are primarily attributed to surface issues such as the release of lattice oxygen and interfacial side reactions. In this study, a facial strategy of gradient fluorination is adopted to construct a thin but robust LiF‐rich cathode electrolyte interface (CEI), highly enhancing the stability of the interface of lithium‐rich oxides. Experimental results and theoretical calculations both demonstrate that the stable CEI not only promotes oxygen participation in redox reactions and simultaneously inhibits oxygen release and structural transition, but also facilitates the transport kinetics of lithium ions. As a result, the gradient fluorinated lithium‐rich cathode delivers highly enhanced rate performance (133 mAh g−1 at 5 C), superior cycling stability with a capacity retention of 81.9% after 100 cycles at 1 C (250 mAh g−1), and alleviated voltage fade (only 1.75 mV per cycle). Moreover, a unique formation mechanism for LiF‐rich surfaces is proposed according to theoretical calculations. This work not only provides a fresh understanding of the CEI formation mechanism, but also show a promising avenue for designing LiF‐rich CEIs applicable to other layered oxide cathodes.

Interfacial Design for a 4.6 V High‐Voltage Single‐Crystalline LiCoO2 Cathode

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries

Electrolyte regulating and interface engineering for high voltage LiCoO2 lithium metal batteries

Surface-interspersed nanoparticles induced cathode-electrolyte interphase enabling stable cycling of high-voltage LiCoO 2

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO2 at 4.65 V

In-situ reconstructed surface/inner-structure synergistic design enabling 4.6 V LiCoO 2 cathode for all-solid-state thin-film battery

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

In-situ constructing a rigid and stable dual-layer CEI film improving high-voltage 4.6 V LiCoO2 performances

Amide‐Functional, Li3N/LiF‐Rich Heterostructured Electrode Electrolyte Interphases for 4.6 V Li||LiCoO2 Batteries

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO<sub>2</sub> at 4.65 V

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

A Tough Janus-faced CEI Film for High Voltage Layered Oxide Cathodes beyond 4.6 V

Formation of LiF‐rich Cathode‐Electrolyte Interphase by Electrolyte Reduction

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Phosphate-Rich Interface for a Highly Stable and Safe 4.6 V LiCoO2 Cathode

Non‐Sacrificial Additive Enables a Non‐Passivating Cathode Interface for 4.6 V Li||LiCoO2 Batteries

Ultrathin Dense LiF Coverage Coupled with a Near-Surface Gradient Fluorination Lattice Enables Fast-Charging Long-Life 4.6 V LiCoO2

Cathode Electrolyte Interface Engineering by Gradient Fluorination for High‐Performance Lithium Rich Cathode

Lattice‐Matched Interfacial Modulation Based on Olivine Enamel‐Like Front‐Face Fabrication for High‐Voltage LiCoO2

Constructing Highly Li+ Conductive Electrode Electrolyte Interphases for 4.6 V Li||LiCoO2 Batteries Via Electrolyte Additive Engineering