Abstract:A surface‐to‐bulk modification with Li2TiO3 coating and gradient Ti doping is demonstrated to solve the deterioration of LiCoO2 at high voltage. The synergetic modification enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. Elevating the charging cut‐off voltage is an effective strategy to increase the energy density of LiCoO2. However, unstable interfacial structures and unfavorable phase transitions in bulk are inevitably triggered during deep de‐lithiation at high voltage. Herein, an integrated surface‐to‐bulk Ti‐modification strategy is applied to LiCoO2, enabling uniform Li2TiO3 coating on the surface and gradient Ti‐doping toward the structural bulk. The resultant Ti‐modified LiCoO2 (T‐LCO) electrode can be stably cycled up to 4.6 V, providing a high‐rate capability of 137 mAh g−1 at 5C and a long‐life stability with 80.5% capacity retention after 400 cycles at 1C, far outperforming the unmodified LiCoO2 electrode with only 50.7% capacity retention. In situ X‐ray diffraction characterization and density functional theory calculation reveal that the synergistic modification of T‐LCO enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. This work presents a "two birds one step" strategy to enhance the cycling stability and achievable capacity of high‐voltage LiCoO2 for developing high energy density lithium‐ion batteries.

In-situ reconstructed surface/inner-structure synergistic design enabling 4.6 V LiCoO 2 cathode for all-solid-state thin-film battery

Off-Stoichiometry Induced Few-Nanometer Surface Layer for High-Performance Layered Cathode in Nonaqueous and Aqueous Electrolytes

Practical Surface-Reconstruction Strategy Based on Self-Reactive Interface Design Enables Ultralong Cyclability of Commercial Cathodes for Lithium-Ion Batteries

Improving Stability of High Voltage LiCoO2 by Synergetic Surface Modification Via in Situ Surface Conversion

Spinel-stabilized layered LiCoO2 cathode by surface reconstruction strategy

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

An in Situ Formed Surface Coating Layer Enabling LiCoO2 with Stable 4.6 V High‐Voltage Cycle Performances

In Situ-Constructed Multifunctional Interface for High-Voltage 4.6 V LiCoO2

Outside‐In Nanostructure Fabricated on LiCoO2 Surface for High‐Voltage Lithium‐Ion Batteries

A compact interphase involving reversible redox couple stabilizes 4.6 V LiCoO2 cathode

A multifunctional manipulation to stabilize oxygen redox and phase transition in 4.6 V high-voltage LiCoO2 with sXAS and EPR studies

Surface engineering of LiCoO2 by a multifunctional nanoshell for stable 4.6V electrochemical performance

External-to-internal Synergistic Strategy to Enable Multi-Scale Stabilization of LiCoO2 at High-Voltage

Modulating the Spin State to Stabilize the Surface and Bulk Structure for Durable 4.6 V LiCoO2 Cathodes

Surface Design with Cation and Anion Dual Gradient Stabilizes High-Voltage LiCoO<sub>2</sub>

Scalable Precise Nanofilm Coating and Gradient Al Doping Enable Stable Battery Cycling of LiCoO2 at 4.7 V

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

Surface Design with Cation and Anion Dual Gradient Stabilizes High‐Voltage LiCoO2

High-Entropy Surface Complex Stabilized LiCoO<sub>2</sub> Cathode

Enabling Stable 4.6 V LiCoO2 Cathode Through Oxygen Charge Regulation Strategy