Abstract:Highly flexible, nonvolatile resistive switching-based memory devices with a hierarchical thin-film architecture were fabricated using a low-temperature, cost-efficient solution processing technique. The device structure consists of an ITO-coated flexible PET substrate as the bottom electrode and a PMMA-embedded reduced-graphene/ZnO nanoparticle (NP) (rGO/ZnO NP) heterostructure as the flexible active layer. Besides, a PMMA-embedded graphene oxide (GO/PMMA)-based device was also fabricated as a reference. The operating voltage of this device is limited within ±2 V, whereas the ON/OFF current ratio is ∼106, which is ∼103 times higher than the reference device. The device also exhibited excellent endurance and retention characteristics, with no significant degradation for more than 50 cycles. Besides, the retention time of this device is ∼104 s, which is several times more than that of the reference device. These electrical performance enhancements were attributed to the multifunctionality introduced by the rGO/ZnO NP heterostructures, which combine the excellent conductivity of rGO nanosheets with charge trapping and transport properties and high electron mobility of ZnO nanostructures. A model based on the energy band of the components of this composite material has been proposed for a better understanding of this mechanism. Flexibility studies exhibited stable device performance for an extreme bending radius of 6 mm. The resistance of the device in ON and OFF states did not show any significant change even after 1000 bending cycles, thus establishing the device as an excellent memory candidate for flexible electronic applications such as flexible displays and sensors, wearable devices, implantable medical devices, and portable diagnostic devices.

Laser-induced graphene-based miniaturized, flexible, non-volatile resistive switching memory devices

A Flexible Laser-Induced Graphene Memristor with Volatile Switching for Neuromorphic Applications

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

Enabling Superior Stretchable Resistive Switching Memory Via Polymer-Functionalized Graphene Oxide Nanosheets

Fabrication of Carboxymethyl Cellulose and Graphene Oxide Bio-Nanocomposites for Flexible Nonvolatile Resistive Switching Memory Devices.

Solution-processable zinc oxide nanorods and a reduced graphene oxide hybrid nanostructure for highly flexible and stable memristor

Direct Observation of Indium Conductive Filaments in Transparent, Flexible, and Transferable Resistive Switching Memory

A multilevel resistive switching memristor based on flexible organic-inorganic hybrid film with recognition function

Retention Behavior of Graphene Oxide Resistive Switching Memory on Flexible Substrate

A Flexible Resistive Switching Device for Logical Operation Applications in Wearable Systems

Gold (Au)-Doped Lead Sulfide-Polyvinyl Alcohol (PbS-PVA) Nanocomposites for High-Performance, Flexible Memristors

High Performance Full-Inorganic Flexible Memristor with Combined Resistance-Switching

Liquid‐Metal‐Induced Memristor Behavior in Polymer Insulators

Nonvolatile resistive memory and synaptic learning using hybrid flexible memristor based on combustion synthesized Mn-ZnO

Direct laser writing of copper and copper oxide structures on plastic substrates for memristor devices

Flexible, Multilevel, and Low-Operating-voltage Resistive Memory Based on MoS2–rGO Hybrid

Flexible transparent memory systems based on solution-processed organic memristors

Functionalized Graphitic Carbon Nitride for Metal-free, Flexible and Rewritable Nonvolatile Memory Device Via Direct Laser-Writing

Resistance‐Switchable Graphene Oxide–Polymer Nanocomposites for Molecular Electronics

Tristable Switching of the Electrical Conductivity Through Graphene Quantum Dots Sandwiched in Multi-Stacked Poly(Methyl Methacrylate) Layers

Flexible Nanoscale Memory Device Based on Resistive Switching in Nickel Oxide Thin Film