Abstract:The resistive switching memory effects in metal-insulator-metal devices with aluminium (Al) as top electrode (TE) and bottom electrode (BE). A solution processed active layer consisting of zinc oxide (ZnO) nanoparticles embedded in an insulating polyvinyl alcohol (PVA) matrix and polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) has been studied by using flexible polyethylene terephthalate (PET) substrates. The current-voltage (I-V) measurements of hybrid Al/ZnO-PVA/PEDOT:PSS/Al/flexible PET substrate device exhibited a non-volatile bistable resistive switching behaviour, which is attributed to the trapping, storage and transport of charges in the electronic states of the ZnO nanoparticles. The performance of hybrid device is significantly enhanced over control Al/PEDOT:PSS/Al and Al/ZnO-PVA/Al devices due the presence of PEDOT:PSS polymer. This PEDOT:PSS improves the performance of oxygen ions (holes) migration toward BE and protect back oxygen vacancies (electrons) migrate toward BE from ZnO-PVA composites which may reduces the leakage current, as a result, increased the 'ON state/OFF state' current ratio of 7.9 × 103 times. The fabricated hybrid device showed high ON/OFF switching current ratio larger than five orders of magnitude with low operating voltages. It is observed that, the existence of two conducting states, namely, low conductivity state (OFF state) and high conductivity state (ON state), exhibiting bistable behaviour. The state of the device was maintained even after removal of the applied bias, indicating the non-volatile memory. The observed current-time response showed good memory retention behaviour of the fabricated devices. The excellent stability and retention performances of hybrid device verify the reliability of this device and demonstrate their potential for application in non-volatile bistable memory device. The carrier transport mechanism of the bistable behaviour for the fabricated non-volatile organic bistable devices structures is described on the basis of the I-V experimental results by analyzing the effect of space charge and electronic structure. Interestingly, the device performance was not degraded and remains identical even after bending the device from 60-120° angles, which indicates high potential for flexible non-volatile bistable memory device applications. This demonstration provides a class of memory devices with the potential for future flexible electronics applications.

Gold (Au)-Doped Lead Sulfide-Polyvinyl Alcohol (PbS-PVA) Nanocomposites for High-Performance, Flexible Memristors

Flexible resistive switching bistable memory devices using ZnO nanoparticles embedded in polyvinyl alcohol (PVA) matrix and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

Transient and Flexible Polymer Memristors Utilizing Full-Solution Processed Polymer Nanocomposites.

Flexible Memristor Based on Lead‐Free Cs2AgBiBr6 Perovskite for Artificial Nociceptors and Information Security

Flexible Memristive Devices Based on Polyimide:Mica Nanosheet Nanocomposites with an Embedded PEDOT:PSS Layer

High Performance Full-Inorganic Flexible Memristor with Combined Resistance-Switching

Flexible memristors with low-operation voltage and high bending stability based on Cu2AgBiI6 perovskite

Yolk–shell Nanorattles Encapsulating a Movable Au Nanocore in Electroactive Polyaniline Shells for Flexible Memory Device

Resistive Switching and Synaptic Behaviors of Tan/Al2o3/Zno/Ito Flexible Devices with Embedded Ag Nanoparticles

1T MoS2/CoS2 Heterostructures Enabling Enhanced Resistive Switching Behavior in Sodium Alginate-based Flexible Memristors

Effect of a PEDOT:PSS Modified Layer on the Electrical Characteristics of Flexible Memristive Devices Based on Graphene Oxide:Polyvinylpyrrolidone Nanocomposites

Resistive Memory-Switching Behavior in Solution-Processed Trans, trans-1,4-bis-(2-(2-naphthyl)-2-(butoxycarbonyl)-vinyl) Benzene–PVA-Composite-Based Aryl Acrylate on ITO-Coated PET

Flexible Nonvolatile Resistive Memory Devices Based on SrTiO3 Nanosheets and Polyvinylpyrrolidone Composites

Laser-induced graphene-based miniaturized, flexible, non-volatile resistive switching memory devices

A flexible memory device made of SnO2-hBN nanocomposite exhibits stable resistive switching application

Organic-Inorganic Nanocomposite Film for High-Performance Stretchable Resistive Memory Device.

A multilevel resistive switching memristor based on flexible organic-inorganic hybrid film with recognition function

High-Performance Flexible Polymer Memristors Based on Silver Ions-Doped Polyethylenimine

Resistance Switching Characteristics of Solid Electrolyte Chalcogenide Ag(2)Se Nanoparticles for Flexible Nonvolatile Memory Applications.