Abstract:Highly flexible, nonvolatile resistive switching-based memory devices with a hierarchical thin-film architecture were fabricated using a low-temperature, cost-efficient solution processing technique. The device structure consists of an ITO-coated flexible PET substrate as the bottom electrode and a PMMA-embedded reduced-graphene/ZnO nanoparticle (NP) (rGO/ZnO NP) heterostructure as the flexible active layer. Besides, a PMMA-embedded graphene oxide (GO/PMMA)-based device was also fabricated as a reference. The operating voltage of this device is limited within ±2 V, whereas the ON/OFF current ratio is ∼106, which is ∼103 times higher than the reference device. The device also exhibited excellent endurance and retention characteristics, with no significant degradation for more than 50 cycles. Besides, the retention time of this device is ∼104 s, which is several times more than that of the reference device. These electrical performance enhancements were attributed to the multifunctionality introduced by the rGO/ZnO NP heterostructures, which combine the excellent conductivity of rGO nanosheets with charge trapping and transport properties and high electron mobility of ZnO nanostructures. A model based on the energy band of the components of this composite material has been proposed for a better understanding of this mechanism. Flexibility studies exhibited stable device performance for an extreme bending radius of 6 mm. The resistance of the device in ON and OFF states did not show any significant change even after 1000 bending cycles, thus establishing the device as an excellent memory candidate for flexible electronic applications such as flexible displays and sensors, wearable devices, implantable medical devices, and portable diagnostic devices.

Resistance Switching Characteristics of Solid Electrolyte Chalcogenide Ag(2)Se Nanoparticles for Flexible Nonvolatile Memory Applications.

CuAg/Al 2 O 3 /cuag Threshold Switching Selector for RRAM Applications

Flexible Electronics Applications of Ge‐rich and Se‐Substituted Phase‐change Materials in Non‐volatile Memories

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Resistive Switching and Synaptic Behaviors of Tan/Al2o3/Zno/Ito Flexible Devices with Embedded Ag Nanoparticles

Resistive Switching Devices Based on Nanocrystalline Solid Electrolyte (Agi)0.5(agpo3)0.5

Resistive switching in the devices of Ag/amorphous Ag 30 Ge 17 Se 53 films/Pt

Resistive switching in the devices of Ag/amorphous Ag<sub>30</sub>Ge<sub>17</sub>Se<sub>53</sub> films/Pt

Gold (Au)-Doped Lead Sulfide-Polyvinyl Alcohol (PbS-PVA) Nanocomposites for High-Performance, Flexible Memristors

Resistive Switching in Organic Memory Devices for Flexible Applications

Resistive Switching in Aqueous Nanopores by Shock Electrodeposition

Ultralow Switching Voltage and Power Consumption of GeS2 Thin Film Resistive Switching Memory

1T MoS2/CoS2 Heterostructures Enabling Enhanced Resistive Switching Behavior in Sodium Alginate-based Flexible Memristors

Resistance Switching Effect of Memory Device Based on All-Inorganic Cspbbri2 Perovskite

Nonvolatile Resistive Switching in Nanocrystalline Molybdenum Disulfide with Ion-Based Plasticity

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

Conductive metallic filaments dominate in hybrid perovskite-based memory devices

Bipolar Resistive Switching Performance Of The Nonvolatile Memory Cells Based On (Agi)(0.2)(Ag2moo4)(0.8) Solid Electrolyte Films

The Growth Of Metallic Nanofilaments In Resistive Switching Memory Devices Based On Solid Electrolytes

Retention Behavior of Graphene Oxide Resistive Switching Memory on Flexible Substrate

Purely electronic nanometallic resistance switching random-access memory