Abstract:Laser-directed energy deposition (L-DED) is considered as an effective repair method for damaged single-crystal (SX) superalloy turbine blades. However, controlling stray grains (SGs) and epitaxial growth is still the major problem. This study investigated the influences of pre-solution treatment and intrinsic heat treatment (IHT) on the formation of SGs and epitaxial growth of L-DED René N5 SX superalloy. The γ/γ' eutectics and coarse γ' precipitates at the inter-dendrite region can be eliminated after pre-solution treatment procedures before the L-DED experiment. A lower temperature in pre-solution treatment resulted in the retention of residual γ/γ' eutectics and coarse γ' precipitates. Thus, the aggravated element segregation within the local melt pool and interface collapse during the L-DED process can result in stray grains (SGs) formation. Improved pre-solution treatment procedures can help reduce SGs caused by the residual carbides at the bottom of the molten pool. Besides, the SG formation in the deposited layers can be attributed to the recrystallization as a result of high thermal stress during the IHT in thermal cycles. The optimized pre-solution treatment procedure reduced the elemental segregation of the substrates , resulting in a larger primary dendrite arm spacing (PDAS) from the bottom of the deposited layers. Due to IHT during thermal cycles in the deposited layers, the partial aging treatment promoted the re-precipitation and growth of γ' phase. Meanwhile, the optimized pre-solution treatment procedure decreased the size of the heat-affected zone (HAZ) caused by thermal cycles. In summary, by optimizing the substrates' pre-solution treatment procedures to eliminate the γ/γ' eutectics , the formation of SGs resulting from substrate segregation can be controlled. This work provides the potential guidance of substrate pre-treatment for L-DED repair of SX superalloys.

Grain structure and texture control of additive manufactured nickel-based superalloy using quasi-continuous-wave laser directed energy deposition

Effect of closed-loop controlled melt pool width on microstructure and tensile property for Fe-Ni-Cr alloy in directed energy deposition

Quasi-continuous-wave laser directed energy deposition on inclined NV E690 steel plates: Melt pool and temperature evolution

Microstructure Control and Hot Cracking Prevention During Laser Additive Manufacturing of Cobalt-Based Superalloy

Epitaxial growth behavior and stray grains formation mechanism during laser surface re-melting of directionally solidified nickel-based superalloys

Texture tailored through combination of molten pool morphology and scanning path in laser additive manufacturing of alloy 718

Gaussian and Circular Oscillating Laser Directed Energy Deposition of WC/NiCu Composites

Towards the equiaxed grain microstructure in CrMnFeCoNi high‐entropy alloy fabricated by directed energy deposition

Grain refinement and crack inhibition of hard-to-weld Inconel 738 alloy by altering the scanning strategy during selective laser melting

Modeling of epitaxial growth of single crystal superalloys fabricated by directed energy deposition

In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process

Directed energy deposition additive manufacturing of a Sc/Zr-modified Al–Mg alloy: Effect of thermal history on microstructural evolution and mechanical properties

On the control of epitaxial growth and stray grains during laser-directed energy deposited Ni-based single crystal superalloy

Effect of laser incident energy on the densification and structure–property relationships of additively manufactured CrCoNi medium-entropy alloy

Grain boundary network evolution in electron-beam powder bed fusion nickel-based superalloy Inconel 738

High Resolution 3D Strain and Orientation Mapping within a Grain of a Directed Energy Deposition Laser Additively Manufactured Superalloy

Microstructure and fracture behavior of 90W-7Ni-3Fe alloy fabricated by laser directed energy deposition

Tailoring material microstructure and property in wire-laser directed energy deposition through a wiggle deposition strategy

On the banded microstructures in CoCrMo-Ni in-situ alloyed through laser powder bed fusion

A new strategy to inhibit stray grain formation during laser directed solidification of single crystal superalloys

Grain refinement and strengthening of additively manufactured Nb by doping TiC nanoparticle prepared via laser directed energy deposition