Abstract:Amorphous Fe73.5-xCoxSi13.5B9Cu1Nb3（x=10,30,50） ribbons were prepared by the single copper wheel melt spinning technique in the air atmosphere.The nanocrystallization kinetics of amorphous ribbons was investigated by differential scanning calorimetry（DSC）.The apparent activation energies of amorphous ribbons were calculated by using Kissinger and Ozawa methods.It was found that the activation energies of the first crystallization reduce and those of the second crystallization rise with increasing Co content.The local Avrami parameter m for primary crystallization was calculated using Johnson-Mehl-Avrami（JMA） model.The values of the Avrami parameter showed that the primary crystallization mechanism of amorphous ribbons varied at different stages.In the initial stage,the crystallization mechanism was bulk crystallization with three dimensional nucleation and grain growth controlled by diffusion.In the following stage,it was surface crystallization with one dimensional nucleation and grain growth at a near zero nucleation rate.The variation of soft magnetic properties of nanocrystalline Fe63.5Co10Si13.5B9Cu1Nb3 powder cores as a function of milling time has been investigated.It was found that the effective permeability of the cores shows high frequency stability and decreases with increasing milling time.The quality factor increases with increasing frequency in the lower frequency range,reaches a maximum at the frequency of 80 kHz,and then decreases gradually with increasing frequency.

Structure and magnetic properties of spinodal decomposed Cu60Ni20Fe10Co10 ribbons with hard magnetism

Structure and Magnetic Properties of Melt-Spun (Nd0.625ni0.375)(85)al-15 Ribbons

Preparing ribbons with core@shell columnar structures and high magnetization using phase transition decomposition mechanism

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

The Magnetic and Microstructural Evolution of Ni45mn24ga23co4cu4 Heusler Alloy Ribbons

Structure and Properties of a Ribbon from FeCoNiSiB High-Entropy Alloy

Hard magnetic properties and microstructures of melt-spun SmCo5Fex (x = 0, 1 and 2) ribbons

Hard magnetic properties and microstructures of melt-spun SmCo<sub>5</sub>Fe<sub><i>x</i></sub>(<i>x</i>= 0, 1 and 2) ribbons

Microstructure, martensitic transformation kinetics, and magnetic properties of (Ni50Mn40In10)100−xCox melt-spun ribbons

Amorphous-crystalline Dual-Layer Structures Resulting from Metastable Liquid Phase Separation In(fe 50 Co 25 B 15 Si 10 ) 80 Cu 20 Melt-Spun Ribbons

Effect of melt-spinning speed on the microstructure and magnetic properties of Al–Cu–Fe alloy-doped SmCo5 ribbons

Structures and Magnetic Properties of the Co7Hf Melt-Spun Ribbons

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Multiscale microstructural evolution of Fe–Ni–Al–Ti alloy with high magnetization

Structure and magnetic properties of alnico alloy doped SmCo5–Cu ribbons

Compositions, Magnetic Properties and GMR Performances of Melt-Spun Cu–Co–Ni Ribbons

Effect of annealing on the structure and magnetic properties of SmCo5-based ribbons with Al-Cu-Fe addition

Magnetic hardening in amorphous alloy Sm60Fe30Al10

Structure, Thermal Stability and Magnetostriction of Melt-Spun Nd(Fe1-xCox)1.93 Ribbons

Structure and Magnetic Properties of Melt-Spinning Pr(Fe0.6co0.4)(2) Alloys