Abstract:The Ni-Mn-based shape memory alloys as a promising candidate of elastocaloric material has been reported in many literatures, especially on bulk samples. The as-spun ribbon, which has a larger surface area and is more efficient for heat transfer, is rarely studied and hence of importance. In the present work, we succeeded in producing very long as-spun Ni-Fe-Mn-(Al, In) ribbons, with around 300 mm in length. The microstructure and mechanical properties of these as-spun ribbons were thoroughly investigated by scanning electron microscopy / electron backscattered diffraction (SEM/EBSD), nanoindentation and 3-points bending experiments. Through SEM/EBSD analyses, the microstructure and texture of the as-spun ribbons were studied. A gradient in microstructure exists along the thickness direction (TD) of the ribbon, which is induced by the temperature gradient during fast rate solidification, resulting in fine equiaxed grains along the surface contacted with the rotating wheel in melt spinning process and elongated grains, respectively. Both equiaxed and elongated grains possess a strong {001} fiber texture (<001>//TD). Nanoindentation analyses show little variation of hardness between the two different microstructures. The ductility index of both Ni-Fe-Mn-Al and Ni-Fe-Mn-In ribbons are within the range of intermetallic materials. The substitution of In by Al allows to increase very slightly the ductility index, which can reach 0.75. The fine equiaxed grains show better tensile resistance than the elongated grains in 3-points bending test. The substitution of In by Al improves the maximum bending strain by a factor of 3. The maximum strain for Ni-Fe-Mn-Al as-spun ribbons can reach 3 % before fracture. Fractography shows that the intergranular fracture is the main damage mechanism in these as-spun ribbons.

Structure, Thermal Stability and Magnetostriction of Melt-Spun Nd(Fe1-xCox)1.93 Ribbons

Structure and Magnetic Properties of Melt-Spun (Nd0.625ni0.375)(85)al-15 Ribbons

Structural, Magnetic and Magnetostrictive Behavior in Nd(Fe1−xCox)1.9 Compounds

Spin Configuration and Magnetostriction in Nd0.9Tb0.1(Fe1−xCox)1.9 (0≤x≤0.55) Alloys

Microstructure, martensitic transformation kinetics, and magnetic properties of (Ni50Mn40In10)100−xCox melt-spun ribbons

Structure and Magnetic Properties of Melt-Spun Pr(Fe1-Xcox)(2) Alloys

Crystallization Kinetics of Co-Finemet Amorphous Alloys and Magnetic Properties of Nanocrystalline Powder Cores

Synthesis, Magnetic Properties and Magnetostriction of Pr0.5Nd0.5(Fe1-xCox)

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Interaction and Magnetic Properties of NdCeFeB Melt-Spun Ribbons

Magnetic Properties of Nd(Fe1-xCox)10.5M1.5 (m=mo and V) and Their Nitrides

The Magnetic Properties of Melt-Spun Nd9Fe85−xMnxB6(x=0–1) Ribbons

Magnetic phase transition and magnetic entropy change in melt-spun La1−xNdxFe11.5Si1.5 ribbons

Structure, Magnetic Properties and Magnetostriction in Ndfe1.9 Bulk Nanocrystalline Alloys

Synthesis and Magnetostriction of Melt-Spun Pr1−xTbx(Fe0.6Co0.4)2 Alloys

Structure and Magnetic Properties of Melt-Spinning Pr(Fe0.6co0.4)(2) Alloys

Composition Anisotropy Compensation and Magnetostriction in Pr(Fe1−xCox)1.9 (⩽x⩽0.5) Cubic Laves Alloys

Structure and magnetostriction of Tb0.4Nd0.6(Fe0.8Co0.2)1.90 alloy prepared by solid-state synthesis

Magnetic Properties and Magnetic Entropy Change of LaFe_(11.5)Si_(1.5) and Melt-Spun La_(1-x)Nd_xFe_(11.5)Si_(1.5) Compounds

Microstructure and correlated mechanical properties study of Ni-(Fe, Co)-Mn-(Al, In) as-spun ribbons

High Coercivity Nd-Ce-Fe-B Nanostructured Ribbons Prepared from Melt Spinning Technique