Abstract:The Ni-Mn-based shape memory alloys as a promising candidate of elastocaloric material has been reported in many literatures, especially on bulk samples. The as-spun ribbon, which has a larger surface area and is more efficient for heat transfer, is rarely studied and hence of importance. In the present work, we succeeded in producing very long as-spun Ni-Fe-Mn-(Al, In) ribbons, with around 300 mm in length. The microstructure and mechanical properties of these as-spun ribbons were thoroughly investigated by scanning electron microscopy / electron backscattered diffraction (SEM/EBSD), nanoindentation and 3-points bending experiments. Through SEM/EBSD analyses, the microstructure and texture of the as-spun ribbons were studied. A gradient in microstructure exists along the thickness direction (TD) of the ribbon, which is induced by the temperature gradient during fast rate solidification, resulting in fine equiaxed grains along the surface contacted with the rotating wheel in melt spinning process and elongated grains, respectively. Both equiaxed and elongated grains possess a strong {001} fiber texture (<001>//TD). Nanoindentation analyses show little variation of hardness between the two different microstructures. The ductility index of both Ni-Fe-Mn-Al and Ni-Fe-Mn-In ribbons are within the range of intermetallic materials. The substitution of In by Al allows to increase very slightly the ductility index, which can reach 0.75. The fine equiaxed grains show better tensile resistance than the elongated grains in 3-points bending test. The substitution of In by Al improves the maximum bending strain by a factor of 3. The maximum strain for Ni-Fe-Mn-Al as-spun ribbons can reach 3 % before fracture. Fractography shows that the intergranular fracture is the main damage mechanism in these as-spun ribbons.

Magnetic Properties and Magnetoresistance Effect in Ni43.3Mn31.5Fe11.7Al13.5 Ribbons

Effects of Chilling-Roll Materials and Ambient Pressure on the Microstructure and Magnetic Properties of Nanocomposite Nd2fe14b/Alpha-Fe Magnets

Structure and Magnetic Properties of Melt-Spun (Nd0.625ni0.375)(85)al-15 Ribbons

Magnetic and Magnetocaloric Properties in Melt-Spun and Annealed Ni42.7Mn40.8Co5.2Sn11.3 Ribbons

Microstructure, Magnetic and Magnetocaloric Properties in Ni42.9co6.9mn38.3sn11.9 Alloy Ribbons

Martensitic Transformation and Magnetocaloric Properties in Ni40.4Mn46.5Sn10.9Sb2.2 Ribbons

Effect of Annealing on the Martensitic Transformation and Magnetocaloric Effect in Ni44.1Mn44.2Sn11.7 Ribbons

Effect of Annealing on the Martensitic Transformation and Magnetoresistance in Ni–Mn–Sn Ribbons

Microstructure and correlated mechanical properties study of Ni-(Fe, Co)-Mn-(Al, In) as-spun ribbons

The Magnetic and Microstructural Evolution of Ni45mn24ga23co4cu4 Heusler Alloy Ribbons

The Antiferromagnetic-Ferromagnetic Conversion and Magnetostructural Transformation in Mn-Ni-Fe-Ge Ribbons

Magnetic Properties, Thermal Stabilities and Microstructures of Melt-Spun Misch-Metal-Fe-B Alloys

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Effect of Nd Content on Magnetic Properties and Microstructure of Nd_xFe_(90.5-x)Zr_(3.0)B_(6.5_)Nanocomposite Magnets with the Big Zr Content

Effect of Al–Cu–Fe addition on the structure and magnetic properties of Nd-Fe-Co-B ribbons

Enhancement of the Martensitic Transformation and Magnetocaloric Effect of Ni-Mn-V-Sn Ribbons by Annealing Treatment

Study of dielectric and magnetic properties with Fe76Si19.4Nb2.7Cu1.7P0.2 ribbons

Multiscale microstructural evolution of Fe–Ni–Al–Ti alloy with high magnetization

Martensitic Transformation Behaviors and Magnetic Properties of Ni–Mn–Ga Rapidly Quenched Ribbons

Ferromagnetism and Double Magnetic Phase Transitions in Rapidly Solidified Mn1.13ni1.03fe0.23ge0.61 Ribbons

Structure, thermodynamic behavior and static magnetic properties of Al addition FeCoNbCuB alloy ribbons