Abstract:Piezoresponse force microscopy (PFM) is a powerful characterization technique to readily image and manipulate ferroelectrics domains. PFM gives insight into the strength of local piezoelectric coupling as well as polarization direction through PFM amplitude and phase, respectively. Converting measured arbitrary units to physical material parameters, however, remains a challenge. While much effort has been spent on quantifying the PFM amplitude signal, little attention has been given to the PFM phase and it is often arbitrarily adjusted to fit expectations or processed as recorded. This is problematic when investigating materials with unknown or potentially negative sign of the probed effective electrostrictive coefficient or strong frequency dispersion of electromechanical responses since assumptions about the phase cannot be reliably made. The PFM phase can, however, provide important information on the polarization orientation and the sign of the electrostrictive coefficient. Most notably, the orientation of the PFM hysteresis loop is determined by the PFM phase. Moreover, when presenting PFM data as a combined signal, the resulting response can be artificially lowered or asymmetric if the phase data has not been correctly processed. Here, we demonstrate a path to identify the phase offset required to extract correct meaning from PFM phase data. We explore different sources of phase offsets including the experimental setup, instrumental contributions, and data analysis. We discuss the physical working principles of PFM and develop a strategy to extract physical meaning from the PFM phase. The proposed procedures are verified on two materials with positive and negative piezoelectric coefficients.

PFM (piezoresponse force microscopy)-aided design for molecular ferroelectrics

Force-Electric Coupling of Nanoscale Ferroelectric Domains Based on Piezoelectric Force Microscopy (PFM)

Nanoscale Ferroelectric Characterization with Heterodyne Megasonic Piezoresponse Force Microscopy

A New Heterodyne Megasonic Piezoresponse Force Microscopy with High-frequency Excitation beyond 100 MHz

Probing Electromechanical Behaviors by Datacube Piezoresponse Force Microscopy in Ambient and Aqueous Environments

Local Probing of the Non-Uniform Distribution of Ferrielectric and Antiferroelectric Phases

Differentiating Ferroelectric and Nonferroelectric Electromechanical Effects with Scanning Probe Microscopy.

Piezoresponse Force Spectroscopy of Ferroelectric Materials

Non-piezoelectric effects in piezoresponse force microscopy

Local Probing of Magnetoelectric Properties of PVDF/Fe3O4 Electrospun Nanofibers by Piezoresponse Force Microscopy

Scanning Probe Microscopy of Ferroelectric Domains in PMN-PT Single Crystal

Piezoelectric Energy Harvesting Based on Multiaxial Ferroelectrics by Precise Molecular Design

Piezo-generated charge mapping revealed through Direct Piezoelectric Force Microscopy

Quantitative Lateral and Vertical Piezoresponse Force Microscopy on A Pbtio3 Single Crystal

Nanoscale Piezoresponse, Acoustic and Thermal Microscopy of Electronic Ceramics

Electrostatic effect on off-field ferroelectric hysteresis loop in piezoresponse force microscopy

Revisiting contrast mechanism of lateral piezoresponse force microscopy

Decoupling competing electromechanical mechanisms in dynamic atomic force microscopy

Depth resolution in piezoresponse force microscopy

Piezoresponse phase as variable in electromechanical characterization

Mapping Nanoscale Domain Patterns in Ferroelectric Ceramics by Atomic Force Acoustic Microscopy and Piezoresponse Force Microscopy