Abstract:This paper reviews efforts to develop growth and fabrication technology for the GaN HBT. Conventional devices are grown by plasma assisted MBE on MOCVD GaN templates on sapphire. HBTs were fabricated on LEO material identifying threading dislocations as the primary source of collector-emitter leakage which was reduced by four orders of magnitude for devices on nondislocated material. Base doping studies show that the mechanism of this leakage is localized punch-through caused by compensation near the dislocation. High contact and lateral resistance in the base cause large parasitic common emitter offset voltages (from 1 to 5 V) in GaN HBTs. The effect of this voltage drop in common emitter characteristics is discussed. The combination of this voltage drop and the emitter collector leakage make Gummel and common base characteristics unreliable without verification with common emitter characteristics. The selectively regrown emitter bipolar transistor is presented with a dc current gain of 6 and early voltage greater than 400 V. The transistor operated to voltages over 70 V. This device design reduces base contact resistance, and circumvented difficulties associated with the emitter mesa etch process. The Mg memory effect in MOCVD grown GaN HBTs is discussed, and MBE grown device layers are shown to produce sharp doping profiles. The low current gain of these devices, (3–6) is discussed, and an HBT with a compositionally graded base is presented, as well as simulations predicting further current gain improvements with base grading.

Burn-in effect in InGaP/GaAs HBT with intrinsically or extrinsically carbon doped base layer

Growth and fabrication of GaN/AlGaN heterojunction bipolar transistor

InGaP/InGaAsN/GaAs NpN double-heterojunction bipolar transistor

Heavily Carbon-Doped Gaas Grown by Movpe Using Carbon Tetrabromide for Hbts

Gamma-Induced Degradation Effect of InP HBTs Studied by Keysight Model

LPMOVPE grown GaAs:C films

A Comprehensive Study of Algaas/Gaas Beryllium- and Carbon-Doped Base Heterojunction Bipolar Transistor Structures Subjected to Rapid Thermal Processing

Enhancing GaN/AlxGa1−xN-Based Heterojunction Phototransistors: The Role of Graded Base Structures in Performance Improvement

Investigation of the Degradation of InGaAs/InP Double HBTs under Reverse Base-Collector Bias Stress

High reliability InGaP/GaAs HBT

Model Parameters and Degradation Mechanism Analysis of Indium Phosphide Hetero-Junction Bipolar Transistors Exposed to Proton Irradiation

Understanding the Degradation of InP/InGaAs Heterojunction Bipolar Transistors Induced by Silicon Nitride Passivation

GaN-Based Double-Heterojunction Bipolar Transistors With a Composition Graded p-InGaN Base

Ni Diffusion and Its Influence on Electrical Properties of AlxGa1−xN∕GaN Heterostructures

Effect of emitter-base spacer design on the performance of InP/GaAsSb/InP DHBTs grown by MOCVD

Radiation Effects on Bipolar Junction Transistors Induced by 25 Mev Carbon Ions

GaN HBT: toward an RF device

Characteristics and Degradation Mechanisms under High Reverse Base–Collector Bias Stress in InGaAs/InP Double HBTs

A Comparative Study of Metamorphic Inp/Ingaas Heterojunction Bipolar Transistors (mhbts) Grown by Gas and Solid Source Molecular Beam Epitaxy (Mbe)

AlGaN/GaN Heterojunction Bipolar Transistors With High Current Gain and Low Specific on-Resistance

Selective injection AlGaN/GaN heterojunction bipolar transistors with patterned regrown base contacts