Abstract:The CoCrFeMnNi high‐entropy alloy powder, produced through gas atomization, is introduced into a graphite die measuring 40 mm in diameter. Spark plasma sintering (SPS) is engrossed at a vacuum pressure of 0.001 Pa on HP D 25/3 SPS apparatus. These laser parameters commonly encompass factors such as scanning speed, layer thickness, and laser power, which play pivotal roles in shaping the final product's quality and properties. High‐entropy alloys (HEAs) are gaining attention for their exceptional properties but achieving precision and surface quality in powder metallurgy (PM) can be challenging. This study investigates the mechanical properties of CoCrFeNiMn HEAs produced through the flake powder metallurgy (FPM) technique and laser powder bed fusion (LPBF) preservative industrial, which established outstanding antiwear properties. To assess the enhancement of mechanical behavior and wear resistance by incorporating boron nitride (BN) into CoCrFeNiMn composites is fabricated via FPM. By incorporating BN into the composites, the mechanical behavior is significantly enhanced, leading to improved resistance against wear. Furthermore, the study delivers comprehensions into the serration behavior microstructure and shear localization in a high‐strain‐rate‐deformed CoCrFeMnNi entropy‐high alloy produces through metallurgy in powder. The serration behavior of the CoCrFeMnNi HEA is discussed concerning strain rate and temperature. Accordingly, the study employs the LPBF technique to fabricate the CoCrFeMnNi alloy from the prepared flakes. Microstructural characterization using scanning electron microscopy and X‐ray diffraction techniques to explore phase distribution, grain size, and possible segregation in the CoCrFeMnNi alloy produced through FPM‐LPBF is performed. In this particular investigation, a gradient microstructure is achieved through fusion in a laser‐powder bed of CoCrFeMnNi HEA onto highly deformed equal‐atomic HEA sheets. The resulting combination of partially recrystallized regions, exhibiting elevated yield strength, and fully recrystallized regions, demonstrates enhanced strain hardenability and elongation, and yields superior mechanical properties. The results obtained from the FPM‐LPBF CoCrFeMnNi alloy will be compared with those of conventionally processed CoCrFeMnNi to highlight the advantages and improvements achieved through the proposed method. The study findings reveal that the fundamental understanding of HEAs' behavior under LPBF with FPM affords valuable insights into optimizing the processing parameters and achieving superior mechanical attributes.

Effect of Process Parameters on Part Quality, Microstructure, and Mechanical Properties of a WC-Co-Hexagonal Boron Nitride Alloy Prepared by Laser Power Bed Fusion Process

Effect of Process Parameters on Microstructure and Properties of AlCoCrFeNi-WC-WS2 Composite Coating Prepared by Laser Cladding

High-pressure Synthesis of Tungsten Carbide–cubic Boron Nitride (wc–cbn) Composites: Effect of Cbn Particle Size and Volume Fraction on Their Microstructure and Properties

Investigating the Effects of Boron Nitride on Mechanical Properties of CoCrFeNiMn Composites

Effects of Different Substrates on the Formability and Densification Behaviors of Cemented Carbide Processed by Laser Powder Bed Fusion

Laser powder bed fusion of pure Nb and Nb + WC powder mixture

The Influence of Thermal Properties Anisotropy on Subtractive Laser Processing of B4C/h-BN Composites

Advances in Laser Powder Bed Fusion of Tungsten, Tungsten Alloys, and Tungsten-Based Composites

Effects of hexagonal boron nitride content on forming quality and performance of laser powder bed fusion manufactured nickel-based hastelloy X composites

High Pressure Synthesis of Tungsten Carbide–Cubic Boron Nitride (WC–cBN) Composites: Effect of Thermodynamic Condition and cBN Volume Fraction on their Microstructure and Properties

The effect of hexagonal boron nitride nanopowders addition on the mechanical behaviors of basalt fabric reinforced composites

Design and Fabrication of Machinable Al<sub>2</sub>O<sub>3</sub>/h-BN Composites and FGMs

The Effect of Solution Aging on the Microstructure and Mechanical Properties of a Laser Powder Bed Fusion-Formed WC-Reinforced 18Ni300 Composite

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite

Laser powder bed fusion of cemented carbides by developing a new type of Co coated WC composite powder

Microstructure and mechanical properties of WC-12Co cemented carbide fabricated by laser powder bed fusion on a WC-20Co cemented carbide substrate

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

Process Optimization of SiC-Reinforced Aluminum Matrix Composites Prepared Using Laser Powder Bed Fusion and the Effect of Particle Morphology on Performance

High-precision laser powder bed fusion of 18Ni300 maraging steel and its SiC reinforcement composite materials

Mesoscopic simulation of surface morphology and thermodynamic mechanism during laser powder-bed fusing Ni-based composite: Underlying role of WC weight fraction

Enhanced properties of hard metal WC-Ni processed from nanostructured powders