Abstract:The WC-Co composite material is one of the most difficult materials to manufacture using a one-step additive manufacturing process such as Laser Powder Bed Fusion process (L-PBF). Recently, the addition of hexagonal boron nitride (hBN) has conferred good mechanical properties (hardness and wear) to WC-Co. However, comprehensive studies on the feasibility of adopting L-PBF for the composite are lacking. Thus, this study seeks to use L-PBF to prepare WC-Co-hBN (hBN: 3 vol.%) cemented carbide specimens by varying the processing parameters (laser power, scan speed and scan spacing). The effects of processing parameters on microstructural and mechanical properties on specimens are investigated using microstructural and chemical composition analysis, surface porosity analysis, microhardness and fracture toughness testing. The innovation of the study is that the hBN addition coupled with the varying printing parameters can regulate the resultant microstructure of the material and dictate very different mechanical properties. In detail, the findings of the experiments indicate that scan spacing was a significant factor in obtaining high densification. A highly dense specimen at 98% relative density (12.73 g/cm 3 ) can be achieved at 0.04 mm scan spacing. We also recognized a reduction in the density generally linked to the low sinterability of BN, which resulted in a local volume increase of the specimen. Thus, hBN could be a good candidate for lightweight properties when added to materials, lowering the composite's effective density. The L-PBF procedure resulted in inhomogeneous and fast grain growth of WC, which was linked to the non-uniform temperature distribution and varying cooling rates of melt pools during processing. Processed specimens were largely composed of polyangular WC carbides and WC platelets. The volume fraction of these two structures were influenced solely by the scan speed and laser power. The WC structure type has a significant effect on the strength of the composite. As a result, the study shows possibility of fabricating cemented carbides for functionally graded applications by adjusting the process parameters affecting WC carbides' morphology.

Effects of hexagonal boron nitride content on forming quality and performance of laser powder bed fusion manufactured nickel-based hastelloy X composites

Laser powder bed fusion of WC-reinforced Hastelloy-X composite: microstructure and mechanical properties

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

Microstructural Control Strategy Based on Optimizing Laser Powder Bed Fusion for Different Hastelloy X Powder Size

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

High wear resistance and strength of Hastelloy X reinforced with TiC fabricated by laser powder bed fusion additive manufacturing

Effects of the process parameters on the formability and properties of Ni54(at.%) Ti alloys prepared by laser powder bed fusion

Improving properties of h-BN/GH4169 self-lubricating composites prepared using nickel coated h-BN powders

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

Investigation of deformation mechanisms in Hastelloy X superalloy manufactured via laser powder-bed fusion: Insights into effects of carbides and cellular structure at elevated temperatures

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

Effect of Process Parameters on Part Quality, Microstructure, and Mechanical Properties of a WC-Co-Hexagonal Boron Nitride Alloy Prepared by Laser Power Bed Fusion Process

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion

Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion

A high-strength Ni–Cr–W based superalloy prepared by laser powder bed fusion: printability, microstructure and tensile properties

Reducing cracking sensitivity of CM247LC processed via laser powder bed fusion through composition modification

Effect of Fe-based metallic glass on microstructure and properties of Hastelloy X manufactured by laser powder bed fusion

Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion

On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study

Synthesis, Microstructural Investigation, and Mechanical Behavior of AA5083/Boron Nitride Nanocomposite