Abstract:Hastelloy X (HX) is used in a wide range of aerospace applications due to its excellent high-temperature properties, Dynamic strain aging (DSA) and Dynamic recrystallization (DRX) are of great interest as they affect the mechanical behavior at high temperatures. In this study, the serrated flow behavior of highly textured Hastelloy X fabricated by laser powder bed fusion (LPBF) is investigated during uniaxial straining over a wide range of temperatures (20–800 °C) and strain rates (5×10 −2 s −1 to 5×10 −4 s −1 ). The alloy exhibits different types of tensile serrated flow in the temperature range of 200–600 °C. The alloy has been shown to have a very good tensile flow behavior. The presence of the Portevin-Le Chatelier effect (PLC) due to dynamic strain failure was observed at temperatures lower than 600 °C, respectively, with an average activation energy value of 45 kJ/mol calculated using the quasi-static aging (McCormick) model, and an average activation energy value calculated using the solute resistance (Cottrell) model of 41.8 kJ/mol, which is significantly lower than the 80–130 kJ/mol of conventionally fabricated HX. The effects of temperature and strain rate on fracture morphology and microstructure were analyzed by SEM, and the dynamic recrystallization behavior and nucleation mechanism were characterized by electron backscatter diffraction (EBSD). The changes in the content of recrystallized texture Cube and deformed texture Goss at different deformation temperatures are explained, and the dynamic recrystallization mode changes, from continuous dynamic recrystallization (CDRX) to discontinuous dynamic recrystallization (DDRX) as the deformation temperature increase. Verification of the different DRX mechanisms contributes to a comprehensive understanding of the microstructural evolution of the hot deformation of HX fabricated by LPBF.

Laser powder bed fusion of WC-reinforced Hastelloy-X composite: microstructure and mechanical properties

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

High wear resistance and strength of Hastelloy X reinforced with TiC fabricated by laser powder bed fusion additive manufacturing

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

Effects of hexagonal boron nitride content on forming quality and performance of laser powder bed fusion manufactured nickel-based hastelloy X composites

Investigation of deformation mechanisms in Hastelloy X superalloy manufactured via laser powder-bed fusion: Insights into effects of carbides and cellular structure at elevated temperatures

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

Effect of Fe-based metallic glass on microstructure and properties of Hastelloy X manufactured by laser powder bed fusion

Investigation of Microstructure and Failure Mechanisms at Room and Elevated Temperature of Hastelloy X Produced by Laser Powder-Bed Fusion

The Effect of Thickness on the Defects and Anisotropy of Thin-Wall Hastelloy X Fabricated Via Laser Powder-Bed Fusion

Microstructural Control Strategy Based on Optimizing Laser Powder Bed Fusion for Different Hastelloy X Powder Size

The Effect of Solution Aging on the Microstructure and Mechanical Properties of a Laser Powder Bed Fusion-Formed WC-Reinforced 18Ni300 Composite

Tailoring the microstructure and mechanical properties for Hastelloy X alloy by laser powder bed fusion via scanning strategy

Dynamic strain aging and recrystallization mechanisms in laser powder bed melt printing of highly textured Hastelloy X

Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction

Microstructure evolution and wear resistance of a novel ceramic particle-reinforced high-entropy alloy prepared by laser powder bed fusion

Achieving high strength and high ductility in WC-reinforced iron-based composites by laser additive manufacturing

Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed