Abstract:Hastelloy X (HX) is used in a wide range of aerospace applications due to its excellent high-temperature properties, Dynamic strain aging (DSA) and Dynamic recrystallization (DRX) are of great interest as they affect the mechanical behavior at high temperatures. In this study, the serrated flow behavior of highly textured Hastelloy X fabricated by laser powder bed fusion (LPBF) is investigated during uniaxial straining over a wide range of temperatures (20–800 °C) and strain rates (5×10 −2 s −1 to 5×10 −4 s −1 ). The alloy exhibits different types of tensile serrated flow in the temperature range of 200–600 °C. The alloy has been shown to have a very good tensile flow behavior. The presence of the Portevin-Le Chatelier effect (PLC) due to dynamic strain failure was observed at temperatures lower than 600 °C, respectively, with an average activation energy value of 45 kJ/mol calculated using the quasi-static aging (McCormick) model, and an average activation energy value calculated using the solute resistance (Cottrell) model of 41.8 kJ/mol, which is significantly lower than the 80–130 kJ/mol of conventionally fabricated HX. The effects of temperature and strain rate on fracture morphology and microstructure were analyzed by SEM, and the dynamic recrystallization behavior and nucleation mechanism were characterized by electron backscatter diffraction (EBSD). The changes in the content of recrystallized texture Cube and deformed texture Goss at different deformation temperatures are explained, and the dynamic recrystallization mode changes, from continuous dynamic recrystallization (CDRX) to discontinuous dynamic recrystallization (DDRX) as the deformation temperature increase. Verification of the different DRX mechanisms contributes to a comprehensive understanding of the microstructural evolution of the hot deformation of HX fabricated by LPBF.

Investigation of deformation mechanisms in Hastelloy X superalloy manufactured via laser powder-bed fusion: Insights into effects of carbides and cellular structure at elevated temperatures

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Investigation of Microstructure and Failure Mechanisms at Room and Elevated Temperature of Hastelloy X Produced by Laser Powder-Bed Fusion

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

Dynamic strain aging and recrystallization mechanisms in laser powder bed melt printing of highly textured Hastelloy X

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion

Anisotropic Tensile and Fatigue Properties of Laser Powder Bed Fusion Ti6Al4V under High Temperature

Mechanism of High Temperature Mechanical Properties Enhancement of Ni-based Superalloys Repaired by Laser Directed Energy Deposition: Microstructure Analysis and Crystal Plasticity Simulation

Cracking Mechanism and Control of Hastelloy X Prepared by Laser Powder Bed Fusion

Insight into Elongation and Strength Enhancement of Heat-Treated LPBF Ni-based Superalloy 718 Using In-Situ SEM-EBSD

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Synergic effects of scanning pattern and heat treatment on the microstructure-hot tensile behavior relationships of powder bed fusion-laser beam manufactured Hastelloy X

The Effect of Thickness on the Defects and Anisotropy of Thin-Wall Hastelloy X Fabricated Via Laser Powder-Bed Fusion

Temperature-dependent Tensile Deformation and Plasticity Loss Mechanism of a Novel Ni-Cr-W-based Superalloy Prepared by Laser Powder Bed Fusion

Laser powder bed fusion of WC-reinforced Hastelloy-X composite: microstructure and mechanical properties

Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X

Characterization of the microstructure, texture, and tensile behavior of additively manufactured Hastelloy X superalloy: Insights into heat treatment at 900 °C