Abstract:Hastelloy X (HX) is used in a wide range of aerospace applications due to its excellent high-temperature properties, Dynamic strain aging (DSA) and Dynamic recrystallization (DRX) are of great interest as they affect the mechanical behavior at high temperatures. In this study, the serrated flow behavior of highly textured Hastelloy X fabricated by laser powder bed fusion (LPBF) is investigated during uniaxial straining over a wide range of temperatures (20–800 °C) and strain rates (5×10 −2 s −1 to 5×10 −4 s −1 ). The alloy exhibits different types of tensile serrated flow in the temperature range of 200–600 °C. The alloy has been shown to have a very good tensile flow behavior. The presence of the Portevin-Le Chatelier effect (PLC) due to dynamic strain failure was observed at temperatures lower than 600 °C, respectively, with an average activation energy value of 45 kJ/mol calculated using the quasi-static aging (McCormick) model, and an average activation energy value calculated using the solute resistance (Cottrell) model of 41.8 kJ/mol, which is significantly lower than the 80–130 kJ/mol of conventionally fabricated HX. The effects of temperature and strain rate on fracture morphology and microstructure were analyzed by SEM, and the dynamic recrystallization behavior and nucleation mechanism were characterized by electron backscatter diffraction (EBSD). The changes in the content of recrystallized texture Cube and deformed texture Goss at different deformation temperatures are explained, and the dynamic recrystallization mode changes, from continuous dynamic recrystallization (CDRX) to discontinuous dynamic recrystallization (DDRX) as the deformation temperature increase. Verification of the different DRX mechanisms contributes to a comprehensive understanding of the microstructural evolution of the hot deformation of HX fabricated by LPBF.

Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Investigation of deformation mechanisms in Hastelloy X superalloy manufactured via laser powder-bed fusion: Insights into effects of carbides and cellular structure at elevated temperatures

On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

Room and elevated temperature tensile and fatigue behaviour of additively manufactured Hastelloy X

Anisotropic Tensile and Fatigue Properties of Laser Powder Bed Fusion Ti6Al4V under High Temperature

Investigation of Microstructure and Failure Mechanisms at Room and Elevated Temperature of Hastelloy X Produced by Laser Powder-Bed Fusion

Dynamic strain aging and recrystallization mechanisms in laser powder bed melt printing of highly textured Hastelloy X

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

Creep-fatigue Properties and Deformation Mechanism of 316L Steel Fabricated by Laser Powder Bed Fusion (PBF-LB/M)

Mechanical properties of Hastelloy X produced by laser powder bed fusion and affected by spatter redeposition

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

Very high cycle fatigue behavior of laser powder bed fusion additively manufactured Ti6Al4V alloy at elevated temperature

Surface roughness-informed fatigue life prediction of L-PBF Hastelloy X at elevated temperature

Microstructural Evolution and Formation of Fine Grains During Fatigue Crack Initiation Process of Laser Powder Bed Fusion Ni-based Superalloy

Mechanism of High Temperature Mechanical Properties Enhancement of Ni-based Superalloys Repaired by Laser Directed Energy Deposition: Microstructure Analysis and Crystal Plasticity Simulation

Fatigue Characterization and Modeling of Additively Manufactured Hastelloy-X Superalloy