Abstract:Hastelloy X (HX) is used in a wide range of aerospace applications due to its excellent high-temperature properties, Dynamic strain aging (DSA) and Dynamic recrystallization (DRX) are of great interest as they affect the mechanical behavior at high temperatures. In this study, the serrated flow behavior of highly textured Hastelloy X fabricated by laser powder bed fusion (LPBF) is investigated during uniaxial straining over a wide range of temperatures (20–800 °C) and strain rates (5×10 −2 s −1 to 5×10 −4 s −1 ). The alloy exhibits different types of tensile serrated flow in the temperature range of 200–600 °C. The alloy has been shown to have a very good tensile flow behavior. The presence of the Portevin-Le Chatelier effect (PLC) due to dynamic strain failure was observed at temperatures lower than 600 °C, respectively, with an average activation energy value of 45 kJ/mol calculated using the quasi-static aging (McCormick) model, and an average activation energy value calculated using the solute resistance (Cottrell) model of 41.8 kJ/mol, which is significantly lower than the 80–130 kJ/mol of conventionally fabricated HX. The effects of temperature and strain rate on fracture morphology and microstructure were analyzed by SEM, and the dynamic recrystallization behavior and nucleation mechanism were characterized by electron backscatter diffraction (EBSD). The changes in the content of recrystallized texture Cube and deformed texture Goss at different deformation temperatures are explained, and the dynamic recrystallization mode changes, from continuous dynamic recrystallization (CDRX) to discontinuous dynamic recrystallization (DDRX) as the deformation temperature increase. Verification of the different DRX mechanisms contributes to a comprehensive understanding of the microstructural evolution of the hot deformation of HX fabricated by LPBF.

High-temperature high cycle fatigue performance of laser powder bed fusion fabricated Hastelloy X: Study into the microstructure and oxidation effects

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Investigation of deformation mechanisms in Hastelloy X superalloy manufactured via laser powder-bed fusion: Insights into effects of carbides and cellular structure at elevated temperatures

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

Revealing the Interrelation Between Process Parameters and Microstructure to Promote the Mechanical Performance for Hastelloy-X

Low cycle fatigue behavior of nickel-based superalloy GH4145/SQ at elevated temperature

The anisotropic oxidation behavior of Hastelloy X alloy fabricated by laser powder-bed fusion (LPBF) during the cyclic oxidation process

Investigating the deformation and microstructural evolution of laser powder-bed fusion of Hastelloy X during high temperature fatigue loading

Microstructural Evolution and Formation of Fine Grains During Fatigue Crack Initiation Process of Laser Powder Bed Fusion Ni-based Superalloy

Oxidation behavior of Hastelloy X alloy fabricated by selective laser melting and subsequent hot isostatic pressing treatment

High-Temperature Tensile Properties of Hastelloy X Produced by Laser Powder Bed Fusion with Different Heat Treatments

Dynamic strain aging and recrystallization mechanisms in laser powder bed melt printing of highly textured Hastelloy X

Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion

Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion

Laser powder bed fusion of WC-reinforced Hastelloy-X composite: microstructure and mechanical properties

Very high cycle fatigue behavior of laser powder bed fusion additively manufactured Ti6Al4V alloy at elevated temperature

On the effect of laser powder-bed fusion process parameters on quasi-static and fatigue behaviour of Hastelloy X: A microstructure/defect interaction study

The Microstructures and Mechanical Properties of a Welded Ni-Based Hastelloy X Superalloy

Investigation of fatigue behavior of laser powder bed fusion Ti-6Al-4V: Roles of heat treatment and microstructure

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

High wear resistance and strength of Hastelloy X reinforced with TiC fabricated by laser powder bed fusion additive manufacturing