Abstract:Micro electroforming is an important technology, which is widely used for fabricating micro metal devices in MEMS. The micro metal devices have the problem of poor adhesion strength, which has dramatically influenced the dimensional accuracy of the devices and seriously limited the development of the micro electroforming technology. In order to improve the adhesion strength, ultrasonic agitation method is applied during the micro electroforming process in this paper. To explore the effect of the ultrasonic agitation, micro electroforming experiments were carried out under ultrasonic and ultrasonic-free conditions. The effects of the ultrasonic agitation on the micro electroforming process were investigated by polarization and alternating current (a.c.) impedance methods. The real surface area of the electroforming layer was measured by cyclic voltammetry method. The compressive stress and the crystallite size of the electroforming layer were measured by X-ray Diffraction (XRD) method. The adhesion strength of the electroforming layer was measured by scratch test. The experimental results show that the imposition of the ultrasonic agitation decreases the polarization overpotential and increases the charge transfer process at the electrode-electrolyte interface during the electroforming process. The ultrasonic agitation increases the crystallite size and the real surface area, and reduces the compressive stress. Then the adhesion strength is improved about 47% by the ultrasonic agitation in average. In addition, mechanisms of the ultrasonic agitation improving the adhesion strength are originally explored in this paper. The mechanisms are that the ultrasonic agitation increases the crystallite size, which reduces the compressive stress. The lower the compressive stress is, the larger the adhesion strength is. Furthermore, the ultrasonic agitation increases the real surface area, enhances the mechanical interlocking strength and consequently increases the adhesion strength. This work contributes to fabricating the electroforming layer with large adhesion strength.

Enhancement mechanism of megasonic field on bubble removal in nickel micro electroforming

Enhancement of micro hole wetting and hydrogen bubble release in the process of Ni micro electroforming under megasonic field

The Effects of Discharge Parameters on the Surface Morphology of Nickel Microspheres by Edm Combined with Ultrasonic Field

Improving the Thickness Uniformity of Micro Electroforming Layer by Megasonic Agitation and the Application

Fabrication of High-Density Micro Column Chip Mould Using Micro Electroforming Technology Assisted by Megasonic Field and Electrochemical Etching

Reducing the residual stress in micro electroforming layer by megasonic agitation

Research of megasonic electroforming equipment based on the uniformity of electroforming process.

Evaluation Of Residual Stress Of Metal Micro Structure Electroformed With Megasonic Agitation

Effects of Ultrasonic Agitation on Adhesion Strength of Micro Electroforming Ni Layer on Cu Substrate

Numerical Simulations and Electrochemical Experiments of the Mass Transfer of Microvias Electroforming under Ultrasonic Agitation

Study of liquid-phase mass transfer and residual stress in jet electrodeposition process with coaxial megasonic agitation

Quantitative Study of Mass Transfer in Megasonic Micro Electroforming Based on Mass Transfer Coefficient: Simulation and Experimental Validation

Enhancement of wire electrochemical micromachining of 40CrNiMoA with electrolyte ultrasonic assistance

Towards Understanding Uniformity of Megasonic-Assisted Through-Mask Electrochemical Micromachining Based on Bubble Dynamics

Fabrication of high-aspect-ratio metallic microstructures by microelectroforming using silver-coated polydimethylsiloxane molds with controllable wettability

Electrochemical investigations of stable cavitation from bubbles generated during reduction of water

Electrochemical Studies Of Electrodeposition Of Nickel For Liga Microstructures

Dynamical model and numerical study of cavitation bubble in ultrasonic assisted electrochemical polishing solution of selective laser melting NiTi alloy

Electrochemical Deposition of Pure-Nickel Microstructures with Controllable Size

Enhancing the Adhesion Strength Between Cu Substrate and Ni Layer in Microelectroforming

Study On Electrocrystallization Of Pulse Micro-Electroforming In Uv-Liga