Study of liquid-phase mass transfer and residual stress in jet electrodeposition process with coaxial megasonic agitation

Ke Zhai,Feng Zhou,Yifan Wang,Shihao Ma,Lide Fang,Liqun Du

DOI: https://doi.org/10.1016/j.ultsonch.2024.107019

Abstract:The electrodeposition process confronts significant challenges arising from mass transfer limitation and residual stress. To address these issues, an innovative method, combining megasonic agitation with coaxial jet electrodeposition, is introduced. This approach aims to enhance mass transfer and mitigate residual stress. First, an electrodeposition nozzle device was designed, and the liquid-phase mass transfer during electrodeposition was analyzed through finite element simulation. Simulation results indicate that the mass transfer coefficient increases with rising megasonic power density. Notably, when the megasonic power density reached 20 W/cm2, the mass transfer coefficient increased from 0.45 × 10-7 m/s to 18.63 × 10-7 m/s, compared to electrodeposition without megasonic agitation. Secondly, electrodeposition experiments were conducted both with and without megasonic assistance. X-ray diffraction (XRD) was employed to measure the residual stress values of the electrodeposited layers. The results reveal that samples processed with megasonic assistance exhibit lower residual stress values compared to those without. Specifically, at a megasonic power density of 10 W/cm2, the residual stress was 94.3 MPa, representing a 37.7 % reduction compared to the residual stress of 151.5 MPa observed in samples without megasonic agitation. Overall, the findings demonstrate that coaxial megasonic agitation can effectively enhance the liquid-phase mass transfer capability during electrodeposition and reduce the residual stress of the electroplated layer. This innovative method presents a promising avenue for improving electrodeposition processes and achieving superior material properties.