Abstract:Excitation of the acoustic field, leading to the Blaha effect, significantly affects the plasticity of a material. In the micro-forming field, the so-called impact effect is found to generate a larger amount of dislocation and produce greater plastic deformation than acoustic softening. In this study, the mechanism of deformation in the surface of the material with ultrasonic vibration assistance was investigated and compared with that in the bulk. Forging tests using a newly developed ultrasonic vibrator were carried out on pure Cu foils with various process conditions. The longitudinal vibration frequency of the ultrasonic transducer was 60 ± 2 kHz, and the vibration amplitude was in an adjustable range of 0~6 μm. Forging tests were carried out at different amplitudes. The result shows that acoustic softening and the impact effect could be separated by an oscilloscope in the micro-forging system. The difference in deformation on the surface asperity caused by acoustic softening and the impact effect is discussed. Compared to acoustic softening, which has a limited effect on the deformation of the surface asperity, the impact effect could create more plastic deformation on the surface asperity. Therefore, the reduction in the surface roughness would increase after the impact effect occurs. In addition, to confirm the mechanism of acoustic softening and the impact effect, the microstructural evolution of specimens, at the surface scale and inner scale, was investigated by electron backscatter diffraction (EBSD). It was found that acoustic softening could create more grain refinement, and with the amplitude increasing, the impact effect would oppositely cause the surface grains to grow. In this study, the mechanism of how the impact effect and acoustic softening affect the deformation behavior of the surface asperity was investigated.

Micro Pin Extrusion of Metallic Materials Assisted by Ultrasonic Vibration

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting

Study on Metal Forming Patterns of the Ultrasonic Vibration Assisted Upset-extruding Process

On the Size Effects in Micro/meso Semisolid Extrusion–forging of A356 Aluminum Alloy

Acoustic softening and hardening of aluminum in high-frequency vibration-assisted micro/meso forming

Surface and volume effects in multimodal ultrasonic vibration assisted micro-extrusion forming: Experiments and modelling

Voxelated Meniscus-Confined Electrodeposition of 3D Metallic Microstructures

Ultrasonic vibration-assisted milling of aluminum alloy

Investigation on friction characteristics of micro double cup extrusion assisted by different ultrasonic vibration modes

Ultrasonic vibration micro-jet ejection for metal additive manufacture

Ultrasonic vibration assisted milling of titanium alloy microchannel

Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review

Influence of ultrasonic vibration on forming force of 1060 aluminum sheet single point incremental forming

Investigation on Deformation Behavior in the Surface of Metal Foil with Ultrasonic Vibration-Assisted Micro-Forging

Effect of axial ultrasonic vibration on the surface topography and microstructure of Al6061 chip in extrusion cutting

Experimental and Numerical Study of Forming Limit in 1060 Aluminum Ultrasonic Vibration Single Point Incremental Forming

Ultrasonic Vibration-Assisted Intrinsic Modeling and Tissue Evolution of 7075 Aluminum Alloy

Micro-extrusion: A potential approach to micro-manufacture miniaturize magnesium metal matrix composite components

Micro-extrusion process and microstructure evolution of miniature heat pipe in 6063 aluminum alloy

Effect of tool wear in ultrasonic vibration-assisted micro-milling