Abstract:The paper considers the system of equations of movement of the material flow, which allows to determine the speed, trajectory of movement of particles, as well as the time of stay of particles in the free working space of the apparatus. Not only the hydrodynamics of flows, but also the kinetics of the drying process in fluidized bed devices (the particle changes its mass during drying, which is reflected in the mode of its movement) has a significant influence on the determination of the required residence time of the particles in the apparatus, which has contact actions with the cascade. A promising way to reduce material and energy costs during heat and mass exchange processes in a fluidized bed is the use of multi-stage countercurrent contact of the liquefying agent and the dispersed phase. Such processes are implemented in cascade-type devices. It should be noted that the analytical dependences presented do not yet allow a reliable description of the hydrodynamics of the movement of solid particles in a device with contact devices. This is due to the fact that the proposed analytical regularities do not take into account the influence of the main design parameters of the cascade contacts on the time the particles stay in the working space of the device. The efficiency of drying devices for drying materials in a fluidized bed largely depends on the flow field of the gas flow, the distribution of which in the working space of the device affects the profile of temperatures and concentrations of the dispersed (solid) phase in the gas flow. Determination of gas flow velocity fields in the working space of the fluidized bed apparatus in combination with calculations of the rate of transition of a dense layer of material into a fluidized state, conditions of expansion of the material layer, operating parameters of fluidization, and conditions of removal of material from the apparatus allows for optimal selection of the design characteristics of this type of apparatus. Consideration of the nature of the movement of the gas flow is important for establishing the regularities of its interaction with the solid phase. Determining the hydrodynamic conditions of flow movement makes it possible to mathematically describe the speed and residence time of solid particles in the apparatus.

Optimizing the trajectory of aggregates in drying units from the asphalt plants

Discrete Element Modeling of Aggregate Gradation Influence on the High Temperature Stability of Structural-Layer Asphalt Mixtures

Optimal Design of an Angular Box for a Mixed Flow Grain Dryer

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Experimental and numerical study of conductive heat transfer in aggregate particles using a flighted, rotary drum

Convective heat transfer analysis in aggregates rotary drum reactor

Performance Simulation of a Modified Geothermal Grain Dryer Based at Menengai Well 3 in Kenya

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

A combined physical and DEM modelling approach to improve performance of rotary dryers by modifying flights design

Estimating the Lifetime of Rotary Dryer Flights Based on Experimental Data

Use of Thermodynamics and Heat Transfer Principles to Predict Virgin Aggregate Temperature in a Hot-Mix Asphalt Drum Plant

Optimal lamella geometry for mixed flow dryers

An Investigation of Heat Transfer of Flexible Fibers in a Rotating Drum Dryer Using the Discrete Element Method

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method

Investigation of Particle Rotation Characteristics and Compaction Quality Control of Asphalt Pavement Using the Discrete Element Method

Theoretical Studies of the Process of Movement of Bulk Building Materials During Drying in the Fluidized Bed of a Cascade Dryer in Construction

Mechanical Response of Asphalt Surfaces under Moving Traffic Loads Using 3D Discrete Element Method

Mathematical modeling and model predictive control research on coal powder burners for aggregate dryers

Heat and Mass Transfer in Agitated, Co-, or Countercurrent Conductive–Convective Heated Drum Dryer

Experimental and Numerical Analysis on Mesoscale Mechanical Behavior of Coarse Aggregates in the Asphalt Mixture during Gyratory Compaction