Abstract:The gradation and mechanical properties of aggregates impressively affect the load carrying capacity and rutting resistance of asphalt mixtures. They are able to provide some fundamental parameters that are linked to mixture performance. In order to accurately detect critical controlled sizes and obtain more fundamental parameters that can characterize load carrying capacity and rutting resistance of asphalt mixtures, this paper aims to develop a mechanics-based approach to evaluate aggregate gradation, which contains the theoretical packing analysis and discrete element simulation. An extended theoretical morphology framework is developed by checking the local and global interlock of graded aggregates in the theoretical packing analysis. The sieve size range of primary structure which has an interactive interlock can be determined in the local interlock check model. The relationship between the transferred force and the induced force is proposed in the densest and loosest packing arrangements, respectively. The morphological parameters of disruption factor and weighted average size for the global scale are also proposed in theoretical packing analysis. Then the discrete element method is used to validate the theoretical framework. The advanced gradation input algorithm procedure is established in the discrete element simulation to simulate the compression test of graded aggregates. The mechanical parameters of contact force, contact points and stress-strain curves are extracted from the simulation results. The results show that the discrete element method can validate the theoretical framework and output the performance related parameters. The contact force analysis shows that the aggregates retaining on sieve sizes of 2.36 and 4.75 mm provide more than 50% contribution to resist load, and the aggregates retaining on sieve sizes of 1.18, 0.6 and 0.3 mm provide more than 50% contribution to stabilize the structure. The coordination number analysis suggests that the gradation with more fine aggregates might lead to a greater number of voids but smaller air-void size when the asphalt content and porosity remain constant. The stress-strain curve analysis shows that the modulus and secondary strain are highly related to the rutting performance of an asphalt mixture. (C) 2019 Elsevier Ltd. All rights reserved.

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method

Aggregate Distribution Influence On The Indirect Tensile Test Of Asphalt Mixtures Using The Discrete Element Method

Numerical Simulation of Effect of Horizontal Aggregate Distribution in Asphalt Mixtures on Splitting Test

Three-Dimensional Discrete Element Modelling Of Influence Factors Of Indirect Tensile Strength Of Asphalt Mixtures

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Three-Dimensional Discrete-Element Modeling of Aggregate Homogeneity Influence on Indirect Tensile Strength of Asphalt Mixtures

Micromechanics-Based Analysis of the Effect of Aggregate Homogeneity on the Uniaxial Penetration Test of Asphalt Mixtures

Comparative Modelling of Indirect Tensile Strength of Asphalt Mixtures with and Without Considering Air Void Characteristics

Comparative Study of 2D and 3D Micromechanical Discrete Element Modeling of Indirect Tensile Tests for Asphalt Mixtures

Horizontal Homogeneity in Laboratory-Compacted Asphalt Specimens

Discrete Element Modeling of Aggregate Gradation Influence on the High Temperature Stability of Structural-Layer Asphalt Mixtures

Micromechanical Analysis of Asphalt-Mixture Shear Strength Using the Three-Dimensional Discrete Element Method

3D Discrete Element Modeling of Aggregate Homogeneity Influence on Bituminous Mix Shear Strength

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Micromechanical Discrete Element Modeling of Asphalt Mixture Shear Fatigue Performance

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Towards an Index of Asphalt Mixture Homogeneity

Application of statistical methods in evaluating asphalt mixture homogeneity

Numerical Simulation of an Indirect Tensile Test for Asphalt Mixtures Using Discrete Element Method Software

Factors affecting splitting strength of asphalt mixture

Enhancement Effect of Aggregates on the Low-Temperature Cracking Resistance of Asphalt Mixtures