Abstract:The discrete element method (DEM) coupled with computational fluid dynamics (CFD) is used extensively for the numerical simulation of gas-solid fluidized beds. In order to improve the efficiency of this approach, a coarse grain model of the DEM was proposed in the literature. In this model, a group of original particles are treated as a large-sized particle based on the initial particle distribution, and during the whole simulation process the number and components of these particle-groups remain unchanged. However, collisions between particles can lead to frequent crushing and polymerization of particle-groups. This fact has typically been ignored, so the purpose of this paper is to rationalize the coarse grain DEM-CFD model by considering the dynamic particle-group crushing and polymerization. In particular, the effective size of each particle-group is measured by a quantity called equivalent particle-group diameter, whose definition references the equivalent cluster diameter used by the energy-minimization multi-scale (EMMS) model. Then a particle-group crushing criterion is presented based on the mismatch between the equivalent diameter and actual diameter of a particle-group. As to the polymerization of two colliding particle-groups, their velocity difference after collision is chosen as a criterion. Moreover, considering the flow heterogeneity induced by the particle cluster formation, the EMMS drag force model is adopted in this work. Simulations are carried out by using a finite volume method (FVM) with non-staggered grids. For decoupling the Navier-Stokes equations, the semi-implicit method for pressure linked equations revised (SIMPLER) algorithm is used. The simulation results show that the proposed dynamic coarse grain DEM-CFD method has better performance than the original one.

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

CFD-DEM investigation of the gas-solid flow characteristics in a fluidized bed dryer

Multi-level Coarse-Grained Discrete Element Method Modeling of Cylinder Particle Flow in a Rotating Drum

CFD-DEM Fluidized Bed Drying Study Using a Coarse-Graining Technique

Review of CFD-DEM Modeling of Wet Fluidized Bed Granulation and Coating Processes

Cracking the code: Spatial heterogeneity as the missing piece for modeling granular fluidized bed drying

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Mechanistic modeling of semicontinuous fluidized bed drying of pharmaceutical granules by incorporating single particle and bulk drying kinetics

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Discrete Particle Simulation of Food Grain Drying in a Fluidised Bed

A Dynamic Coarse Grain Discrete Element Method for Gas-Solid Fluidized Beds by Considering Particle-Group Crushing and Polymerization

An Experimentally Validated Coarse-Grain DEM Study of Monodisperse Granular Mixing

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Novel CFD-DEM Model for Spouted Bed Drying Incorporating Intraparticle Heat and Mass Diffusion

Fluidized bed gas-solid heat transfer using a CFD-DEM coarse-graining technique

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM-IBM simulation of particle drying processes in gas-fluidized beds

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Prediction of the Non-Uniform Drying of Wet Grain in a Fluidised-Bed Based on a Modified CFD-DEM Drying Model