Abstract:Deposition of granular materials into a container is a general industrial packing process. In this study, the deposition behaviour of dilute granular mixtures consisting of two types of particles that were of the same particle size but different particle densities in the presence of air was numerically analyzed using a coupled discrete element method (DEM) and computational fluid dynamics (CFD). Bilayer granular mixtures with light particles at bottom and heavy particles at top were first simulated. It was found that the presence of air significantly affected the flow behaviour of the bilayer mixtures. For the system with a relatively low initial void fraction, the air entrapped inside the container escaped through the dilated zones induced due to the friction between the powder bed and wall surfaces. The escaping air streams entrained light particles that were originally located at the bottom of the granular system. Consequently, these light particles were migrated to the top of the granular bed at the end of deposition process. More light particles were migrated when the deposition distance was increased. For the system with a high initial void fraction, some light particles penetrated into the top layer of heavy particles and created a mixing zone. Deposition of random mixtures with different initial void fractions was also investigated and the influence of initial void fraction on the segregation behaviour was explored as well. It was found that the increase of void fraction promoted segregation during the deposition in air. It was demonstrated that, for granular mixtures consisting of particles of different air sensitivities, the presence of air had a significant impact on the mixing and segregation behaviour during the deposition.

CFD-DEM investigation of the gas-solid flow characteristics in a fluidized bed dryer

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Heat Transfer of Batch Simulating Continuous Fluidized Bed with Wet Particles

CFD-DEM-IBM simulation of particle drying processes in gas-fluidized beds

Cfd-Dem Investigation of Particle Elutriation with Electrostatic Effects in Gas-Solid Fluidized Beds

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Dynamic Densification of Wet Granular Materials in Continuous Dense Flows under Gravity

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

Fluidized Bed Drying and Devolatilization of Lignite Washery Tailing Particles: Experiments and Modeling

CFD-DEM Fluidized Bed Drying Study Using a Coarse-Graining Technique

Experimental investigation of wet particle flow characteristics in a pseudo two-dimensional fluidized bed

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

CFD Modeling of Microwave-Assisted Fluidized Bed Drying of Moist Particles Using Two-Fluid Model

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

DEM/CFD Modelling of the Deposition of Dilute Granular Systems in a Vertical Container

Cracking the code: Spatial heterogeneity as the missing piece for modeling granular fluidized bed drying