Abstract:The discrete element method (DEM) coupled with computational fluid dynamics (CFD) is used extensively for the numerical simulation of gas-solid fluidized beds. In order to improve the efficiency of this approach, a coarse grain model of the DEM was proposed in the literature. In this model, a group of original particles are treated as a large-sized particle based on the initial particle distribution, and during the whole simulation process the number and components of these particle-groups remain unchanged. However, collisions between particles can lead to frequent crushing and polymerization of particle-groups. This fact has typically been ignored, so the purpose of this paper is to rationalize the coarse grain DEM-CFD model by considering the dynamic particle-group crushing and polymerization. In particular, the effective size of each particle-group is measured by a quantity called equivalent particle-group diameter, whose definition references the equivalent cluster diameter used by the energy-minimization multi-scale (EMMS) model. Then a particle-group crushing criterion is presented based on the mismatch between the equivalent diameter and actual diameter of a particle-group. As to the polymerization of two colliding particle-groups, their velocity difference after collision is chosen as a criterion. Moreover, considering the flow heterogeneity induced by the particle cluster formation, the EMMS drag force model is adopted in this work. Simulations are carried out by using a finite volume method (FVM) with non-staggered grids. For decoupling the Navier-Stokes equations, the semi-implicit method for pressure linked equations revised (SIMPLER) algorithm is used. The simulation results show that the proposed dynamic coarse grain DEM-CFD method has better performance than the original one.

Fluidized bed gas-solid heat transfer using a CFD-DEM coarse-graining technique

A detailed gas-solid fluidized bed comparison study on CFD-DEM coarse-graining techniques

CFD-DEM Fluidized Bed Drying Study Using a Coarse-Graining Technique

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Development and Verification of Coarse‐grain CFD‐DEM for Nonspherical Particles in a Gas–solid Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

An augmented coarse-grained CFD-DEM approach for simulation of fluidized beds

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Use of Precise Area Fraction Model for Fine Grid DEM Simulation of ICFB with Large Particles

Discrete Particle Simulation of Heat Transfer in Pressurized Fluidized Bed with Immersed Cylinders

A Dynamic Coarse Grain Discrete Element Method for Gas-Solid Fluidized Beds by Considering Particle-Group Crushing and Polymerization

Coarse-Grain DEM Modelling in Fluidized Bed Simulation: A Review

Revised Drag Calculation Method for Coarse Grid Lagrangian–Eulerian Simulation of Gas–solid Bubbling Fluidized Bed

The critical role of scale resolution in CFD simulation of gas-solid flows: A heat transfer study using CFD-DEM-IBM method

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

Numerical Simulation of Gas‐solid Heat Transfer Behaviour in Rectangular Spouted Bed

CFD-DEM Numerical Simulation and Experimental Validation of Heat Transfer and Two-Component Flow in Fluidized Bed