On the treatment of bed-to-wall heat transfer in CFD-DEM simulations of gas-fluidized beds

Xin Liu,Niels G. Deen,Yali Tang

DOI: https://doi.org/10.1016/j.ces.2021.116492

IF: 4.7

2021-06-01

Chemical Engineering Science

Abstract:<p>Heat exchange through confining walls is an important feature of gas-fluidized beds. However, near the wall, most of the temperature gradient exists in a thin thermal boundary layer, which is typically smaller than the grid size in the computational fluid dynamics method (CFD). This makes it hard to resolve the temperature distribution near the wall in coupled computational fluid dynamics and discrete element method (CFD-DEM). To obtain a better understanding of the heat transfer mechanism near the confining walls in fluidized beds, we adopted two approaches, i.e., by imposing a thermal boundary condition for the gas phase energy equation and by implementing a particle-wall conduction model for the discrete particle phase. Both methods were first explained in detail and then validated by available experimental results. Finally, the two approaches were compared with respect to their performance on the prediction of the overall particle temperature distribution, parameter sensitivity, and mesh resolution.</p>

engineering, chemical

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the problem of heat transfer modeling through the wall in gas - solid fluidized beds. Specifically, due to the strong particulate - phase heat transfer phenomenon in the near - wall region of the fluidized bed, this results in the temperature gradient being mainly concentrated within a very thin thermal boundary layer close to the wall, and this layer is usually smaller than the grid size in the computational fluid dynamics (CFD) method. Therefore, in the coupled computational fluid dynamics and discrete element method (CFD - DEM) simulation, it is difficult to resolve the temperature distribution in the near - wall region. In order to better understand the heat transfer mechanism near the fluidized - bed wall, the author adopts two methods for research: 1. **Thermal boundary condition method**: Describe the heat transfer in the near - wall region by applying a thermal boundary condition to the gas - phase energy equation. 2. **Particle - wall conduction model**: Describe the heat transfer of the discrete particulate phase by implementing a particle - wall conduction model. These two methods are first explained in detail and verified by the existing experimental results. Finally, the performance of the two methods in predicting the overall particle temperature distribution, parameter sensitivity, and grid resolution is compared. Through these studies, the author hopes to provide some valuable insights for heat transfer modeling from the bed to the wall in fluidized beds, especially in the thermal CFD - DEM simulation of dense gas - solid flows.

On the treatment of bed-to-wall heat transfer in CFD-DEM simulations of gas-fluidized beds

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

A Method to Deal with Constant Wall Flux Boundary Condition in a Fluidized Bed by CFD-DEM

Numerical Study on Thermal Characteristics in Fluidized Beds Using Dem-Cfd

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Wall-to-bed heat transfer in supercritical water fluidized bed using CFD-DEM

Discrete Particle Simulation of Heat Transfer in Pressurized Fluidized Bed with Immersed Cylinders

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

The critical role of scale resolution in CFD simulation of gas-solid flows: A heat transfer study using CFD-DEM-IBM method

Fluidized bed gas-solid heat transfer using a CFD-DEM coarse-graining technique

CFD-DEM investigation of flow and heat transfer characteristics in a directly irradiated fluidized bed

CFD-DEM Numerical Simulation and Experimental Validation of Heat Transfer and Two-Component Flow in Fluidized Bed

Particle scale studies of heat transfer in a moving bed

A computational fluid dynamics-discrete element-immersed boundary method for Cartesian grid simulation of heat transfer in compressible gas–solid flow with complex geometries

Wall to particle bed contact conduction heat transfer in a rotary drum using DEM

Eulerian-Lagrangian Simulation of the Heat Transfer Behavior of Particles with Different Diameters in Fluidized Bed with Immersed Tube

Numerical Simulation of Gas‐solid Heat Transfer Behaviour in Rectangular Spouted Bed

Simulation Investigation of Heating Rate and Temperature Uniformity in Fluidized Bed

Analysis Of The Heat Transfer Mechanism In High-Temperature Circulating Fluidized Beds By A Numerical Model

Numerical investigation of transient gas–solid heat transfer in a packed bed: Impact of intra-particle thermal diffusion

3D Particle-Scale Modeling of Gas–solids Flow and Heat Transfer in Fluidized Beds with an Immersed Tube