Abstract:The existing researches lack the comprehensive comparison of the performance of two‐fluid model (TFM) and computational fluid dynamics‐discrete element model (CFD‐DEM) using a cylindrical fluidized bed as a research object. In addition, the applicability of rotational periodic boundary conditions in CFD‐DEM simulations of cylindrical fluidized beds is still unclear. Therefore, taking cylindrical fluidized bed as the object and studying the performance of different simulation methods can provide guidance for the selection of simulation methods in subsequent related studies. In the present study, TFM and coarse‐grained CFD‐DEM were used in simulations of the fluidized bed to evaluate the performance of different numerical methods. Furthermore, the applicability of rotating periodic boundary conditions in CFD‐DEM simulations was investigated. The results show that TFM and coarse‐grained CFD‐DEM perform in general agreement in predicting macro variables (e.g., overall pressure drop and bed height). However, radial void fraction distribution and void fraction probability density function (PDF) distribution of CFD‐DEM agreed better with the experimental data. CFD‐DEM simulations with rotational periodic boundary conditions applied showed lower predicted void fraction PDF peaks at packed bed heights and poorly modelling particle mixing in the central of cylindrical fluidized bed due to changes in the boundary conditions as well as the number of particle parcels. Therefore, both TFM and CFD‐DEM can obtain reasonable macro variables, but CFD‐DEM predicted more accurate gas–solid two‐phase distribution. The CFD‐DEM with rotating periodic boundary conditions could not reasonably predict the pressure drop and gas–solid two‐phase distribution inside the cylindrical fluidized bed.

Wall-to-bed heat transfer in supercritical water fluidized bed using CFD-DEM

Particle convective heat transfer near the wall in a supercritical water fluidized bed by single particle model coupled with CFD-DEM

On the treatment of bed-to-wall heat transfer in CFD-DEM simulations of gas-fluidized beds

Experimental Study on the Two-Phase Flow Structure in a Supercritical Water-Fluidized Bed

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

Numerical Investigation on the Two Phase Flow Behaviors in Supercritical Water Fluidized Bed with Swirling Flow Distributor

Heat Flux Determination Based on the Waterwall and Gas–solid Flow in a Supercritical CFB Boiler

Drag coefficient and volume fraction of bubbles in a supercritical water fluidized bed

Numerical investigation on fluidization characteristics of binary particles in supercritical water fluidized bed reactor under pulsed conditions

Onset of slugging fluidization in supercritical water fluidized bed

Fluidization of particles in SCW fluidized bed: Voidage distribution of emulsion phase

Study on a Semi-Resolved CFD-DEM Method for Rod-Like Particles in a Gas-Solid Fluidized Bed

Heat transfer characteristic of water wall and partition wall in a 600 MW CFB boiler

The hydrodynamic characteristics of embattlement shaped water wall of a 350 mw supercritical circulating fluidized bed boiler

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

CFD-DEM investigation of flow and heat transfer characteristics in a directly irradiated fluidized bed

Particle-Scale Investigation of Heat Transfer and Erosion Characteristics in a Three-Dimensional Circulating Fluidized Bed

Pulsation effects on mixing behaviour of binary particles with different densities in supercritical water fluidized bed reactors: A CFD-DEM study

Efficient Surrogate-Assisted Parameter Analysis for Coal-Supercritical Water Fluidized Bed Reactor with Adaptive Sampling

Finite element analysis of the heat transfer coefficient of a membrane wall

Numerical study of gas–solid flow characteristics of cylindrical fluidized beds based on coarse‐grained CFD‐DEM method