Finite element analysis of the heat transfer coefficient of a membrane wall

YE Ke,ZHANG Jiansheng,LIU Qing,YUE Guangxi
DOI: https://doi.org/10.16511/j.cnki.qhdxxb.2006.11.024
2006-01-01
Abstract:The finite element was used to predict the effect of the membrane water wall structure in circulating fluidized bed(CFB) reactors on the heat transfer and the feasibility of heat transfer measurements from measured temperature differences.The results indicate that most of the predicted temperatures agree well with the Chinese Standard with the maximum temperatures being somewhat less than the standard.The fraction of heat absorbed in the fin as well as the maximum temperature increase with increasing pitch,while with increasing fin thickness,the fraction of heat adsorbed increases while the maximum temperature decreases.The temperature difference in the water wall was found to be linearly related to the heat transfer from the CFB to the membrane water wall.Measurements using this method in commercial CFB boilers compare reasonably well with heat balance results with the measurements somewhat higher because of the additional heat resistance in the welds.
What problem does this paper attempt to address?